This document describes the Huawei RIL (Radio Interface Layer) for Android and the deliveries included. It includes description on how to integrate the RIL and what is supported.
This document describes best practices when designing a USB interface for use with Huawei wireless modules with USB interface capabilities.
This guide instructs the kernel driver integration development for Huawei modules based on Linux operating system (OS), such as Android, Ubuntu and Chrome OS. It is intended for the driver developers of the products based on Linux kernel OS.
This document mainly describes the power supply design for Huawei modules. This document also provides Huawei modules' requirements for power supplies, which can be used as reference for designing power supplies for Huawei modules. This document is composed of four chapters:
Power Supply Requirements
Power Supply Design Requirements
External Power Supply Circuits
Recommendations for the Layout and Routing of External Power Supply Circuits
This guide will make it easier to migrate from one Huawei module to another. This version also includes the ME909s modules.
This guide explains how to make a dial up connection with Linux.
This document describes AT command interface specifications that is supported by Huawei terminal product MU609 module.
Please read the release note released with the firmware software before using MU609 module and this document.
This document describes how electrostatic discharge (ESD) occurs, how to conduct ESD tests, how interfering signals resulted from ESD are coupled to circuits of electronic devices, and what rules need to be followed during ESD design for Huawei LGA modules. Following these rules can provide users with good ESD performance during applications of Huawei LGA modules.
This document describes the rules and precautions of designing Printed Circuit Board (PCB) interconnection for the HUAWEI LGA module. By observing the rules, users can ensure the performance of this module in use and reduce costs effectively.
This guide instructs the kernel driver integration development for Huawei Modules based on Embedded Linux & Android operating system. It is intended for the driver developers of the products based on Embedded Linux & Android OS.
This document provides instructions for storage, packing, SMT assembly, and rework of the HUAWEI LGA module, and serves as a guide to secondary assembly of the HUAWEI LGA module. Meanwhile, this document provides PCB design guide for module assembly requirements of producibility and maintainability
The HUAWEI LGA module has two types of packaging:
PCB145-3030M: 145 pin LGA with a dimension of 30 mm × 30 mm
PCB114-3020M: 114 pin LGA with a dimension of 30 mm × 20 mm
The purpose of this document is to describe some hardware specification which is useful to develop a product with HUAWEI LGA module supporting PCM (Pulse- Coded Modulation). This document is intended for HUAWEI customers who are integrators and about to implement their applications by using our module.
The HUAWEI LGA module supports the PCM, which can be used for the module to transmit and receive digital audio data. Linear and μ-law codecs are supported. The HUAWEI LGA module uses the PCM interface as part of the audio front end; it easily allows for an external codec to be used instead of the internal codec. As an example, through the PCM you could connect a HUAWEI LGA module to a Bluetooth device.
The HUAWEI LGA module has one PCM port. Please refer to the Hardware Guide of the module that you are in use to know the PIN number of the PCM ports.
Communications through universal asynchronous receiver/transmitter (UART) serial ports is convenient and reliable. UART serial ports are widely adopted in Huawei modules. This design guide describes the serial port specifications of Huawei modules and provides recommended design schemes for peripheral circuits. When designing UART serial ports for Huawei modules, customers can refer to this document.
Most of Huawei modules provide 8-wire serial ports with flow control. These 8-wire serial ports can also be used as 2-wire or 4-wire serial ports.
This is the datasheet for the Huawei module ME609 LGA.
This document is intended to provide references for customers to do module firmware update over the air. Customers need to refer to this document to develop the host application. This document also contains examples and relevant description. Huawei module and the related firmware in the table below support the FOTA service.
Huawei UpdateWizard for Embedded Linux is the tool which is just for updating the
firmware of Huawei module.
The tool complies with interfaces of Huawei device and is forbidden to apply to
devices of any other manufacturer.
This document describes the hardware application interfaces and air interfaces provided by MU609 module.
This document helps the hardware engineer to understand the interface specifications, electrical features and related product information of the MU609 module.
This document gives an overview of the Huawei MU609 HSPA+ LGA Module and it's features.
This chapter provides a brief description of the MU609 LGA module development kit (DVK), including introduction to the DVK and components of the DVK.
This document is intended to provide references for customers to choose appropriate
command sequences to start using the MU609 in a faster manner. This document
also contains examples and relevant description.