Telit_LE910C4-AP_Datasheet.pdf
Datasheet for Telit FN980 and FN980m
This scope of this document is to describe the FN980m TLB which is part of complete
FN980m Development Kit (Dev-Kit)
This document describes the integration steps of the cellular modules USB endpoints in Linux systems.
Telit_ME310G1_W1_Datasheet
This guide describes the Telit LM910G1, ME910G1 and ML865G1 cellular modules AT control commands available and supported
Telit LE910C4_EU_Datasheet
Telit_LE910Cx_Datasheet
Telit_ME910C1_Datasheet
This document introduces the Telit LE910Cx module and presents possible and recommended hardware solutions for developing a product based on the LE910Cx module. All the features and solutions detailed in this document are applicable to all LE910Cx variants, where “LE910Cx” refers to the variants listed in the applicability table.
Datasheet for Telit LE910 Cat-1 mPCIe module
Scope of this document is to give an overview of AT commands related to the integrated GNSS engine, to provide some basic procedure for use it and about the concurrence of the WWAN and GNSS on the MDM9205 products.
AT Command Guide for Telit LE915Ax-P
Hardware user guide for Telit LE915Ax-P
Datasheet for Telit LE910Cx mPCIe series
User guide describing the software interface of Telit LE910Cx series modules.
Application note describing how to use NetworkManager in Linux with Telit Modems
Application note describing how to use ModemManager in Linux with Telit Modems
Application guide for A-GPS functionality on the Telit LE910C1 series, LE910C4 series, ME910C1 series, ML865C1 series, NE910C1 series cellular modules with embedded GNSS tracker.
Thermal design guide for the Telit LE910Cx series miniPCIe form factor module.
Application note for voice audio transmission over USB interface of the Telit LE910Cx series.
Hardware design guide for Telit LE910Cx-mPCIe series.
Thermal design guide for the Telit FN980m module.
User guide describing the software interface of Telit FN980 series modules.
Telit FN980 Hardware Design Guide introduces the FN980 module and presents possible and recommended hardware solutions for developing a product based on this module.
This document is aimed at providing a detailed specification and a comprehensive listing as a Reference for the whole set of AT command
Scope of this document is to give an overview of the Telit FN980 family.
Telit ME310G1 Hardware Design Guide introduces the ME310G1 module and presents possible and recommended hardware solutions for developing a product based on this module.
Hardware user guide for Telit EVB Board.
Quick start guide for Telit EVB Board
This document is aimed in providing an detailed specification and a comprehensive listing as a reference for the whole set of AT command.
The aim of this document is the description of some hardware solutions useful for developing a product with the Telit UE910 module.
Datasheet for Telit LE915Ax-P
Telit_Bravo_Datasheet
ME910G1-W1_datasheet
Datasheet for Telit ME910C1-WW PCIE
Telit_le910cx_mpcie_datasheet.pdf
Telit_BlueMods50_Datasheet
Telit_UE866_Datasheet_
Telit Jupiter JF2 Datasheet
Purpose of this document is providing a detailed specification and a comprehensive listing as a reference for the whole set of AT command for the LE910Cx-series
Scope of this document is to give a description of some hardware solutions useful for developing a product with the Telit ME910C1 module.
Datasheet for Telit LM960A9-P
Hardware user guide for the Telit LM960 and LM960A18 cellular module
The ME310G1/ME910G1/ML865G1 includes unique advanced features in order to support the PSM according to 3GPP Rel-12.
The aim of this document is the description of the suggested Application design to use this functionality.
Datasheet for Telit FN980 M.2 5G module
This document describes LM940 modules software and interface towards host system.
Software user guide for the Telit LM960 cellular module
This guide describes the Telit LM960A18 cellular modules AT control commands available and supported.
Telit ME310G1 Datasheet
This is the datasheet for the Telit ME910G1 series
Datasheet for the Telit LM960A18
This document is aimed in providing a detailed specification and a comprehensive listing as a reference for the whole set of AT command for LWM2M.
This document introduces the Telit LM940A11 module and presents possible and recommended hardware solutions for developing a product based on the LM940A11 module.
Technical datasheet over the Telit LE910Cx LTE LGA modules.
Technical datasheet over the Telit LE910 LTE CAT1 LGA modules.
Purpose of this document is providing a detailed specification and a comprehensive listing as a reference for the whole set of AT command for the LE910 V2 series (LTE/3G/2Gmodules)
This document the describes the specifications of the Telit ME910C1 series modules.
Application note describing the PSM (Power Saving Mode) function for the Telit ME910C1, NE910C1 and ML865C1 cellular modules.
Hardware design guide Telit ME910C1 series miniPCIe form factor
This document describe the AT commands supported by the Telit LM940 series cellular modules.
This guide describes the LM960 series cellular modules accepted (raw) QMI commands.
Voice over LTE (VoLTE) call application note.
Application Note for the Telit digital voice interface.
Hardware Release Notes for the Telit LE910Cx Series for the miniPCIe factor.
Datasheet for the Telit LM940 module.
This guide describes the Telit xE910 series shared surface mount LGA design.
This document contains an overview of the Telit xE910 series miniPCIe modules.
Cad Library files archive for the following Telit modules: UL865, UE910, LE922, LE920A4, LE920, LE910, LE866, HE922-3GR, HE910, GL865_V3, GE910-QUAD_V3, GE910-GNSS, GE866_UE866, GE310-GNSS, CE910
Datasheet for 10819 Telit LM960 CAT-18 mPCIe
Application note describing usage of Telit LE910-V2 modules in Windows 10 IoT.
This document provides a guideline to configure a Telit module and the connected PC to run the NCM protocol on the USB port used to connect the devices.
Document describing the Telit LM940 band configuration and Carrier Aggregation combinations list
This overview document shows the technical differences between Telit HSPA+/3G modules.
Scope of this document is to give an overview of the Telit HE910 family, which can support GSM/GPRS/EDGE and WCDMA/HSPA with data/voice capabilities and optional GPS.
The aim of this document is the description of some hardware solutions useful for developing a product with the Telit HE910 module.
The present document provides a guideline to connect logically the physical serial ports of the module to the services supported by the module itself (GPS, Python, etc.). It is up to the user to configure the module in suitable way to avoid hardware/software resources conflicts. With the generic "ports/services arrangement" expression is intended each possible set of logical connections regarding physical ports and Service Access Points supported by the used module (e.g. AT0, AT1, AT2, TT, PYSER, etc.).
The present document provides a guideline to connect logically the physical serial ports of the module to the services supported by the module itself (GNSS, AppZone, etc.). It is up to the user to configure the module in suitable way to avoid hardware/software resources conflicts. With the generic "ports/services arrangement" expression is intended each possible set of logical connections regarding physical ports and Service Access Points supported by the used module (e.g. AT0, AT1, AT2, etc.).
The aim of this document is the description of some hardware solutions useful for developing a product with the Telit xE910 Mini PCIe Adapter.
This user guide describes the hardware properties of the Telit LN940 series cellular modules.
This document provides a technical overview of the Telit LE910 V2 Series LGA cellular modules.
Scope of this document is to give a description of some hardware solutions useful for developing a product with the Telit LE910 V2 module.
This user guide describes how the intergration of Telit LN940 series cellular modules are performed in Linux environments.
Datasheet for Telit LN94x series M.2 module.
Datasheet for 10820 Telit LN941 CAT-6 M.2
SIM Integration Design Guide Application Note for Telit modules r13
Scope of this document is to give an overview of the good rules to integrate a 2G, 3G, 4G modem with its antenna into a board, posing particular attention on the common pitfalls and best practices.
This document covers the more significant standard and proprietary AT commands provided by Telit's modules. Several module features are described and for each one of them the related AT commands are explained through examples. This document is not an exhaustive description of the AT commands implemented on the Telit's modules series, its target is only to give you an entry point to the AT commands world.
This user guide describes the AT commands supported by the Telit LN940 series cellular modules.
This document describes the QUALCOMM® MSM™ Interface (QMI) architecture and framework. The QMI allows applications on attached Terminal Equipment (TE) devices to access various Services provided by devices based on QUALCOMM’s MSM chipsets and AMSS software.
This guide describes the Telit LM940 and LM960 series cellular modules accepted (raw) QMI commands.
Datasheet for Telit LE922A Series
Telit EVK2 Driver installation guide
Telit EVK2 User Guide
Datasheet for Telit EVK2 developer board
Scope of this document is to give an overview of the Telit UE910 family, which can support GSM/GPRS/EDGE and WCDMA/HSPA with data/voice capabilities.
Telit_xE910_WE866_Bundling Application_Note_r3
Telit_xE910_Global_Form_Factor_Application_Note_r16
Telit_SSL_TLS_User_Guide_r12
Telit_Single_SKU_Application_Note_r0
Telit_SIM_Integration_Design_Guide_Application_Note_r13
Telit_LE910-LE920_Digital_Voice_Interface_Application_Note_r3
Telit_LE9x0_Registration_Flow_r2
Telit_IoT_AppZone_3.0.3_Release_Notes
Telit_HTTP_DW_Cloud_App_0.1.zip
Telit_GNSS_Bundle_app_Note_r5
Telit_eCall_Solution_Application_Note_r6
Telit_Antenna_Detection_Application_Note_r8
Telit App ZoneC User Guide
Telit AppZone C API Reference Guide
Telit AppZone for Android Developer Guide
Telit AppZone for Android Getting Started Guide
Telit AppZone Linux API Reference Guide
Telit AppZone Linux User Guide
Telit AppZone Python API Reference
Telit AppZone Python User Guide
This Zip Archive of Telit 3G Modules Application Notes contains the following documents:
Telit_70-Pin_Connector_Comparison_Application_Note_r0
Telit_Antenna_Detection_Application_Note_r8
Telit_Audio_Settings_Application_Note_ r6
Telit_CMUX_Implementation_User_Guide_r6
Telit_Easy_Script_Python_2.7_r6
Telit_eCall_Solution_Application_Note_r6
Telit_Event_Monitor_Application_Note_r6
Telit_Global_Form_Factor_Application_Note_r3
Telit_GNSS_Bundle_Solutions_Application_Notes_r5
Telit_HE_UE910_UL865_Digital_Voice_Interface_Application_Note_r7
Telit_HE910_A-GPS_Application_Note_r4
Telit_HE910_UE910_SPI_Port_Application_Note_r2
Telit_HE910_UE910_UL865 DVI_Application_ Note_r6
Telit_IoT_AppZone_3.0.3_Release_Notes
Telit_IP_Easy_User_Guide_r19
Telit_Location_Based_Services User_Guide_r1
Telit_Python_Start_Guide_r0
Telit_Run_AT_Remotely_Application_Note_r9
Telit_SIM_Integration_Design_Guide_Application_Note_r13
Telit_SIM-USIM_Toolkit_Application_Note_r5
Telit_SSL_TLS_User_Guide_r12
Telit_UE910_HE910_USB_HSIC_Application_Note_r1
Telit_xE910_Global_Form_Factor_Application_Note_r16
Telit_xE910_RTC_BackUp_Application_Note_r6
Telit_xE910_WE866_Bundling Application_Note_r3
Scope of this document is to give an overview of the Telit LE910 V2 series, which can support LTE communication. It is intended for potential customers that are evaluating the adoption of this product series.
This archive contains the following Telit IoT AppZone Application Notes Documents:
Telit AppZone C User Guide.pdf
Telit AppZone C API Reference Guide.pdf
Telit AppZone for Android Developer Guide.pdf
Telit AppZone for Android Getting Started Guide.pdf
Telit AppZone Linux API Reference Guide.pdf
Telit AppZone Linux User Guide.pdf
Telit AppZone Python API Reference.pdf
Telit AppZone Python User Guide.pdf
This datasheet gives a technical overview of the Telit UE910 HSPA LGA series modules.