TECHSHIP IS A GLOBAL SUPPLIER OF WIRELESS COMPONENTS
Communications through universal asynchronous receiver/transmitter (UART) serial ports is convenient and reliable. UART serial ports are widely adopted in Huawei modules. This design guide describes the serial port specifications of Huawei modules and provides recommended design schemes for peripheral circuits. When designing UART serial ports for Huawei modules, customers can refer to this document.
Most of Huawei modules provide 8-wire serial ports with flow control. These 8-wire serial ports can also be used as 2-wire or 4-wire serial ports.
Archive containing Telit LE910-NA V2 S.SKU firmware update for version V.20.00.507 XFP as well as release notes.
Archive containing Telit LE910-SV1 firmware update for version V.20.00.017 XFP as well as release notes.
Archive containing Telit LE910-SVL firmware update for version V.20.00.037 XFP as well as release notes.
This document describes the electronic specifications, RF specifications, interfaces, mechanical characteristics and testing results of SIM7070 Series PCIE. With the help of this document and other related software application notes/user guides, users can understand and use SIM7070 Series PCIE to design and develop applications quickly.
This archive contains Japan certificates for WPET-236ACN(BT).
Low power data communication system 2.4GHz Band 2,471~2,497MHz
Low power data communication system 5.2/5.3GHz Band Indoor use only
Low power data communication system 5.6GHz Band
Wide band low power data communication system 2.4GHz Band 2,400~2,483.5MHz
This archive contains the Simcom SIM7600E-H and SIM7600SA-H variants firmware LE11B13SIM7600M22 update archive and related release notes.
It is not applicable for the other variants such as SIM7600A-H or SIM7600V-H for the North American market.
This document is aimed in providing a detailed specification and a comprehensive listing as a reference for the whole set of AT command for LWM2M.
This manual introduces the AT commands of Fibocom’s product L850 GL, and describes how the users can communicate with the devices using these commands. It describes the specification of syntax and parameters of the listed AT commands.