The Techship MP302-ES adapter bridges the gap between existing host system designs and new form factors used by 5G/4G cellular modems.

Our in-house designed and EU manufactured adapter series are compatible with most cellular modem data cards available on the market. With the adapter you can install and use M.2 cellular modem data cards in existing hardware plattforms with miniPCIe sockets on board.

Key features
• Supports a wide range of both 4G and 5G cellular modem data cards in the M.2 key B form factor.

• Use onboard pin-jumper to select the active host interface between USB2 or PCI Express (vendor specific feature).

• Thermal conductive areas on adapter PCB for head dissipation of the modem data card with thermal silicone pads.

• Extra capacitors for both improved modem supply voltage stability and electrical noise cancelling.

• Onboard primary SIM card holder, connected to M.2 key B socket primary SIM interface.

• ESIM ready PCB design for the M.2 key B socket secondary SIM interface.

Signal pinouts matching among others
Telit - FN990, FN980
Sierra Wireless - EM9291, EM9191, EM7690
SIMCom - SIM8202, SIM8200
Fibocom - FM160, FM150
Quectel - RM505, RM502, RM500

The MP302-ES adapter interconnects USB2 and PCI Express data interfaces between the miniPCIe edge contacts to the M.2 key B socket.

Techship MP adapter family variants targeted for USB2 and USB2+USB3 interface applications only:
MP101-S - USB2
MP201-S - USB2, USB3

Please observe!
Before any device integration, always ensure hardware compatibility by comparing pin-out mappings, voltage levels, and power output capabilities found in hardware guides for involved products. Failure to do so can result in malfunctioning systems or hardware damage.

Techship MP302-ES Adapter Hardware Guide R1.0

Shopping cart

No items added yet