TECHSHIP IS A GLOBAL SUPPLIER OF WIRELESS COMPONENTS
ACSIP S76GXB DEVELOPSupplier number:
AcSIP S76GXB Developer Kit for AcSIP S76G LoRa module.
This kit contains:
1 x EVK board
1 x LoRa antenna
1 x GPS antenna
The S76G is designed & manufactured in a smallest form factor -SiP (System in Package). It integrates with SEMTECH SX1276 and a 32-bit ultra-low power Cortex M0+ MCU (STM32L073x), S76G supports global 863MHz or 928MHz ISM-Bands. Capable of 2-way communication and reach over 16 km (10 miles) distance in our field test. Besides, S76G contains a GPS chip –SONY CXD5603GF which is used to receive GPS/GPS+GLONASS signals for positioning.
This product is designed with multiple easy to use interfaces (I2C/SPI/UART/GPIO), fine-tuned RF performance and will be offered with complete SDK library & ready to go HDK, it can significantly help the users to shrink the size of end device and simplify the development efforts for any LoRa applications.
Guide over Firmware Update with StLink Tool for AcSip S76S/S78S and S76G/S78G modules.
Datasheet for the SemTech SX1276/77/78/79 - 137 MHz to 1020 MHz Low Power Long Range Transceiver used in AcSIP modules.
This reference manual targets application developers. It provides complete information on
how to use the STM32L0x3 microcontroller memory and peripherals.
The ST-LINK/V2 is an in-circuit debugger/programmer for the STM8 and STM32
microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire
debugging (SWD) interfaces, facilitate communication with any STM8 or STM32
microcontroller located on an application board.
In addition to providing the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL
features digital isolation between the PC and the target application board. It also withstands
voltages of up to 2500 VRMS.
The USB full-speed interface allows communication with a PC and:
STM32 devices via Atollic, IAR, Keil, and TASKING integrated development environments.
Windows Driver Install Files v2.12.16 for FTDI USB to Serial chip used by AcSIP dev kits with USB to UART chip included.
This archive contains the USB driver for ST-LINK/V2 and ST-LINK/V2-1 MCU program flashing tool.
Technology / Antenna Frequency: GSM 850/900/1800/1900, UMTS 2100, Wifi/Bluetooth 2400, LTE 790-960/1710-2690 | Mounting method: Connector | Antenna Location: External | Connector Type: SMA-M | Impedance: 50 Ohm | Polarization: Vertical | Max power: 50 W | Width: 21 mm | Length: 157 mm | Height: 157 mm
1 PCS PRICE $7.30
Technology / Antenna Frequency: GSM 850/900/1800/1900, UMTS 2100, LTE 698-960/1710-2690, Wifi/Bluetooth 2400 | Mounting method: Adhesive | Antenna Location: External | VSWR: 2 :1 | Gain: 2.14 dBi | Connector Type: SMA-M | Impedance: 50 Ohm | Cable length: 30 cm | Cable Specification: RG174 | Polarization: Linear | Max power: 25 W | Operating Temperature Range: -40 °C – 85 °C | Width: 12.5 mm | Length: 117.4 mm | Height: 6.7 mm
1 PCS PRICE $3.90