55010032
Supplier number:
Huawei MU609 Development Kit (DVK) with UART.
The DVK provides a complete solution based on the data and audio functions of the ME909 module.
For designers who adopt the module in their design, the DVK facilitates their module-based programming and troubleshooting in the testing and integration stage.
The MU609 LGA module is soldered onto the interface board in a manner that is similar to the surface mounting of chips. The signals output from the module are transferred to the development board for secondary development.
For data sheet and further information, please see article 10092 Huawei MU609 LGA.
This guide instructs the kernel driver integration development for Huawei modules based on Linux operating system (OS), such as Android, Ubuntu and Chrome OS. It is intended for the driver developers of the products based on Linux kernel OS.
This document describes best practices when designing a USB interface for use with Huawei wireless modules with USB interface capabilities.
This document mainly describes the power supply design for Huawei modules. This document also provides Huawei modules' requirements for power supplies, which can be used as reference for designing power supplies for Huawei modules. This document is composed of four chapters:
Power Supply Requirements
Power Supply Design Requirements
External Power Supply Circuits
Recommendations for the Layout and Routing of External Power Supply Circuits
This guide will make it easier to migrate from one Huawei module to another. This version also includes the ME909s modules.
Guide to the Huawei MU509,MC509, MU609, MU709, ME909u, ME209u-526, ME909s series development boards.
This guide explains how to make a dial up connection with Linux.
This document describes AT command interface specifications that is supported by Huawei terminal product MU609 module.
Please read the release note released with the firmware software before using MU609 module and this document.
This guide instructs the kernel driver integration development for Huawei Modules based on Embedded Linux & Android operating system. It is intended for the driver developers of the products based on Embedded Linux & Android OS.
Communications through universal asynchronous receiver/transmitter (UART) serial ports is convenient and reliable. UART serial ports are widely adopted in Huawei modules. This design guide describes the serial port specifications of Huawei modules and provides recommended design schemes for peripheral circuits. When designing UART serial ports for Huawei modules, customers can refer to this document.
Most of Huawei modules provide 8-wire serial ports with flow control. These 8-wire serial ports can also be used as 2-wire or 4-wire serial ports.
This is the datasheet for the Huawei module ME609 LGA.
This document is intended to provide references for customers to do module firmware update over the air. Customers need to refer to this document to develop the host application. This document also contains examples and relevant description. Huawei module and the related firmware in the table below support the FOTA service.
Huawei UpdateWizard for Embedded Linux is the tool which is just for updating the
firmware of Huawei module.
The tool complies with interfaces of Huawei device and is forbidden to apply to
devices of any other manufacturer.
This document briefly describes the power management related connection hardware
between the host and module.
This document is only applicable to the Windows XP/Android system; and is not
applicable to the Windows 7/8/blue system and later systems released by Microsoft
because of their feature (they defines their own sleep, wakeup and remote wakeup
standards).
MU609 European Community CE Ceritificate (RED)
This archive contains the CCC documentation for the Huawei module MU609.
This is the Austalia A-Tick certificates and reports for the Huawei module MU609. The archive contains Atic doc for both LGA and mPCIe as well as reports.
This is the CFG Certificate for the Huawei module MU609. Contains GFC Table, PIXIT pictures, Test results and GFC picture of web.
This archive contains the Android Radio Interface Layer and the related release notes
It works for android 2.XX to 4.XX.
This RAR archive contains the setup file for the Huawei Windows drivers version 4.25.45.08
The Ulog is a log capturing tool for all Huawei modules.
It can work on PCs and various embedded platforms, and supports different operating systems (OS), such as Windows 7, Linux, and Android.
For Windows there's a graphical user interface available. In order to capture logs with Ulog the modules unique shell lock code need to be acquired based on the IMEI.
This archive contains the .flw file to make a firmware upgrade for the module MU609 to version 12.107.08.00 in Linux. This archive also contains the release notes.
Windows Update Wizard for MU609 that is used to update module firmware version to 12.105.29.00. Release notes are attached in the package
This archive contains the AT&T certified firmware for MU609 on US networks.
How to install Huawei drivers in Windows 10 for modules with Qualcomm chipset?
First install this driver from product page.
Huawei drivers V.4.25.45.08 for Windows
Afterwards open Windows Device Manager and locate HUAWEI named device(s) with warning sign that are not installed correctly.
Right click on each of them and select update driver software...
Select Browse my computer for driver software.
Locate the folder under C:\Program Files (x86)\HUAWEI M2M Driver\Driver\ or the install files folder, select include sub folders also and click next.
Now the drivers should get installed by the system.
You will have to repeat the procedure for all Huawei devices in Device Manager with warning signs.
Now you will have have a working Huawei Qualcomm based module and you can connect to internet with Windows built-in connection manager or Huaweis Mobile Partner software.