TECHSHIP IS A GLOBAL SUPPLIER OF WIRELESS COMPONENTS

Register

SIMCom SIM7000G

Article Number: 10808
Supplier number:

SIMCom SIM7000G is is global-Band LTE-FDD / TDD-LTE and Quad-Band GPRS/EDGE module solution in a LCC type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer.

It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc.

The package of SIM7000G is compatible with SIM900 and SIM800F. AT commands of SIM7000G are mostly compatible with SIM800F.

Key Benefits
● With Power Save Mode(PSM) and Extended
Discontinuous Reception(eDRX), SIM7000G can extend
battery life to 10 years
● SIM7000G provides deeper coverage enhancement
compared to GSM
● The package and AT commands of SIM7000G
mostly are compatible with SIM900 and SIM800F.

Also see SIMCom's developer kit for SIMCom SIM7000G .

End-of-life

This product has reached
end-of-life and can not be
ordered any more.

Quantity Sample Price

No prices available

For more information
please contact us at
sales@techship.com

For larger quantities and complete pricing, please sign in or register

Do you need offline data on this product?

Download datasheet

Subscribe to stay up to date with the latest about this product.

Subscribe to updates
MIMO (Multiple-Input Multiple-Output)
No
LTE Bands
B1 (2100)
B2 (1900)
B3 (1800)
B4 (AWS)
B8 (900)
B12 (700ac)
B13 (700c)
B17 (700bc)
B18 (800lower)
B19 (800 upper)
B20 (800DD)
B5 (850)
B26 (US 850 Ext)
B28 (700 APAC)
B39 (TDD 1900)
GSM/EDGE Bands
B5 (850)
B8 (900)
B3 (1800)
B2 (1900)
Manufacturer
SIMCom
LTE Region
Europe
North America
Asia
Australia
Africa
APAC
Form Factor
LCC
Technology
NB-IoT
CAT-M1 (eMTC)
Antenna Interface
Pin
GPS
Yes
GNSS technology
GPS
GLONASS
BeiDou
Max DL Speed
0.3 Mbps
Max UL Speed
0.375 Mbps
Operating Temperature Range
-40 °C – 85 °C
Driver Support
Windows 7
Windows XP
Windows Vista
Linux
Windows 8
Windows 10
Interface
USB 2.0
Serial / UART
GPIO
I2C
ADC
PCM
SIM card
GPIO
Yes
Size
24x24x2.6 mm
Technical details:
Note! Available bands and speeds are dependent on which mode the module is running, NB-IoT or CAT-M1. See datasheet and technical documentation for more details.

Datasheet for SIMCom SIM7000G NB-IoT/CAT-M1 module

Download

Uploaded at
2018-11-08 13:57:45
Last updated
2018-12-03 14:44:12
Related products
SIMCom SIM7000G
SIMCom SIM7000G Development Kit
SIMCom SIM7000G CAT-M/NB-IoT/GSM miniPCIe

This manual describes the hardware and technical specifications of the module.

Download

This manual describes the AT commands valid for controlling the Simcom SIM7000 Series modules.

Download

SIM800F_SIM900_SIM5300E_Migration to SIM7000_Application Note_V1.00,
SIM7000 Series UART Application Note_V1.00,
SIM7000 Series_FTP_Application Note_V1.00,
SIM7000 Series_GNSS_Application Note_V1.00,
SIM7000 Series_HTTP_Application Note_V1.01,
SIM7000 Series_NTP_Application Note_V1.00,
SIM7000 Series_PING_Application Note_V1.00,
SIM7000 Series_TCPIP_Application Note_V1.01

Download

CE(RED) Certificate for SimCom SIM7000G

Download

Uploaded at
2019-02-04 16:34:15
Last updated
2019-02-04 16:34:44
Version
V.1.0
Related products
SIMCom SIM7000G
SIMCom SIM7000G CAT-M/NB-IoT/GSM miniPCIe

FCC Certificate for SimCom SIM7000G

Download

Uploaded at
2019-02-04 16:36:49
Last updated
2019-02-04 16:36:49
Version
V1.0
Related products
SIMCom SIM7000G CAT-M/NB-IoT/GSM miniPCIe
SIMCom SIM7000G

This archice contains the Simcom SIM7000 Series Firmware Update Tool for Microsoft Windows systems
(Not for SIM7020 series)

Download

Uploaded at
2018-02-27 11:58:25
Last updated
2018-10-05 11:53:43
Version
1.39
Requirements
Microsoft Windows
Simcom SIM7000 series module
Simcom Windows drivers
Related products
SIMCom SIM7000G
SIMCom SIM7000E CAT-M/NB-IoT SMT
SIMCom SIM7000E Development Kit
SIMCom SIM7000G Development Kit
SIMCom SIM7000E CAT-M/NB-IoT PCIE
SIMCom SIM7000G CAT-M/NB-IoT/GSM miniPCIe

This archive contains the SIMCom SIM7000G firmware V.1529B02SIM7000G binary files and related release notes.

Download

Uploaded at
2019-06-19 11:13:15
Last updated
2019-06-24 08:50:23
Version
1529B02SIM7000G
Requirements
Simcom firmware update tool
Module drivers installed
Firmware only compatible with TX3.0 hardware revision, ensure that current firmware revision begins with "1529"
AT command:
AT+GMR
Revision:1529B02SIM7000G
Related products
SIMCom SIM7000G CAT-M/NB-IoT/GSM miniPCIe
SIMCom SIM7000G
Question

How can we use the Simcom SIM7000 series with ECM network interface over USB in Linux systems?

Solution

In the recent firmware releases for the Simcom SIM7000 series it is possible to take advantage of the ECM network interface type over USB in order to establish data connectivity to host system instead of using Modem/PPP protocol or QMI. This how-to FAQ shows how it can be done.

The Simcom SIM7000 series expose a set of serial and QMI/RMNET interface over USB in default configuration.
By sending command:
AT+CECMMODE=1

The USB QMI/RMNET network interface can be configured to become a ECM interface instead. If this is supported in your current firmware version the module will re-enumerate in the host system with a ECM interface.

root@linux:~# usb-devices
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=03 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9001 Rev=00.00
S: Manufacturer=SimTech, Incorporated
S: Product=SimTech SIM7000
S: SerialNumber=1234567890ABCDEF
C: #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
I: If#=0x5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#=0x6 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether

Activate the related network interface in Linux
(check assigned interface name e.g. in dmesg output)
root@linux:~# ip link set dev enx00a0c6047450 up

Run a DHCP client on the network interface:
root@linux:~# dhclient -v enx00a0c6047450
Listening on LPF/enx00a0c6047450/00:a0:c6:04:74:50
Sending on LPF/enx00a0c6047450/00:a0:c6:04:74:50
Sending on Socket/fallback
DHCPREQUEST for 192.168.225.20 on enx00a0c6047450 to 255.255.255.255 port 67 (xid=0x301a9d68)
DHCPACK of 192.168.225.20 from 192.168.225.1 (xid=0x689d1a30)
bound to 192.168.225.20 -- renewal in 16549 seconds.

The only thing needed now is to make sure that you have defined a APN for the subscription and are registered to a cellular network.
AT+CGDCONT?
+CGDCONT: 1,"IP","m2m.tele2.com","0.0.0.0",0,0,0,0

AT+CREG?
+CREG: 0,1

AT+CGATT?
+CGATT: 1

AT+CGACT?
+CGACT: 1,1

AT+CGCONTRDP
+CGCONTRDP: 1,5,m2m.tele2.com,10.160.26.28,,130.244.127.161,130.244.127.169

If APN name, IP etc. is returned with AT+CGCONTRDP, you should now be able to use the ECM network interface.

root@linux:~# ping -I enx00a0c6047450 8.8.8.8
PING 8.8.8.8 (8.8.8.8) from 192.168.225.20 enx00a0c6047450: 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=696 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=155 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=54 time=150 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=54 time=151 ms
64 bytes from 8.8.8.8: icmp_seq=5 ttl=54 time=127 ms
64 bytes from 8.8.8.8: icmp_seq=6 ttl=54 time=146 ms
^C
--- 8.8.8.8 ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 12ms
rtt min/avg/max/mdev = 127.379/237.402/695.622/205.108 ms

Tested on SIM7000G miniPCIe with firmware:
AT+CGMR
Revision:1529B02SIM7000G

Question

How to collect initial diagnostics data and logs for Simcom SIM7000 series cellular modules, needed when requesting Techship technical support?

Solution

In order to troubleshoot and solve a technical problem, we ask you to please provide information about your system and logs from the related Simcom module when creating a technical support ticket.

Problem description of what exact problem is and in what precise situations present.

Describe the host system:
-Hardware (system board, peripherals...)
-Operating system and detailed versions (E.g. Windows, Linux release, kernel...)
-Drivers and driver versions

Identify the precise details of cellular module found on label:
-Model
-SKU/BOM or P/N code
(For RMA returns the IMEI number is mandatory)

If you are running on a Linux based system, please capture the terminal logs bellow:
uname -a
lsusb
lsusb -t
ifconfig -a
ls -l /dev/serial/by-id
ls -l /sys/bus/usb-serial/devices
dmesg

The logs from the cellular module firmware can be acquired by accessing the USB enumerated serial (COM) interfaces accepting AT commands. They can be named modem, AT, PC UI etc. (In Windows device manager, found under modem or serial interfaces). Send the following AT commands bellow to module and capture the output and include them when creating the the technical support ticket.

Test that you get a reply with command:
AT
Command echo enabled:
ATE1
Basic module info:
ATI
Detailed module version info:
AT+SIMCOMATI
Verbose error reporting:
AT+CMEE=2
Module model:
AT+CGMM
Firmware version:
AT+CGMR
IMEI Code:
AT+CGSN
Operational mode:
AT+CFUN?
Pin status:
AT+CPIN?
Get mobile operation band:
AT+CBAND?
Preferred band selection:
AT+CNBP?
Show network system mode:
AT+CNSMOD?
Preferred order CAT-M and NB-IoT:
AT+CMNB?
Preferred network mode:
AT+CNMP?
List network operator info:
AT+COPS?
Network registration status:
AT+CREG?
Network GPRS registration status:
AT+CGREG?
Network EPS registration status:
AT+CEREG?
Signal strength:
AT+CSQ
Request UE system info:
AT+CPSI?
Packet domain attach status
AT+CGATT?
List APN details/PDP profiles:
AT+CGDCONT?
AT$QCPDPP?
PDP profiles attach status:
AT+CGACT?
Show PDP IP address:
AT+CGPADDR
AT+CGCONTRDP
RM network interface status:
AT$QCRMCALL?
Power Saving Mode Setting:
AT+CPSMS?
Entended-DRX Setting:
AT+CEDRXS?
Get Network APN in CAT-M or NB-IOT:
AT+CGNAPN
Service Domain Preference:
AT+CSDP?
LTE Cat-M cell lock configuration:
AT+MCELLLOCK?
LTE NB-IOT cell lock configuration:
AT+NCELLLOCK?
NB-IOT Scrambling Feature config:
AT+NBSC?
APN configuration mode:
AT+CAPNMODE?
Query RRC State:
AT+CRRCSTATE?
CAT-M and NB-IOT band config:
AT+CBANDCFG?
Module crash reset status:
AT+CEDUMP?
NB-IOT band scan optimization config:
AT+CNBS?
Service Domain Preference For NB-IOT:
AT+CNDS?
Network information:
AT+CENG?

The support ticket can be created after login at: https://techship.com/technical_support/

You might also be interested in