TECHSHIP IS A GLOBAL SUPPLIER OF WIRELESS COMPONENTS
SparkLAN WUBM-273ACN is an 802.11ac/b/g/n 2.4GHz + 5GHz USB module based on MediaTek MT7612U chipset. It supports 2T2R (2x2) technology, which runs up to 867Mbps (MSC9).
Adopting the latest 802.11ac solution, WUBM-273ACN is ideal for high throughput networking and multimedia applications that requires better Wi-Fi performance.
802.11ac/b/g/n USB Module, MediaTek MT7612U, 2T2R
‧ Standard: 802.11ac/b/g/n
‧ Chipset: MediaTek MT7612U
‧ Antenna: 2x U.FL connectors or Printing antenna, 2T2R
‧ Data rate up to 867Mbps
‧ Enhanced wireless security: WEP, WPA, WPA2, 802.1x
The total range of the WUBM-273ACN-series is:
10373, WUBM-273ACN(P) USB type A + Printed Antenna conn.
10371, WUBM-273ACN(M12W) 12-pin Wafer + U.FL. conn.
10370, WUBM-273ACN(MU) USB type A + U.FL. conn.
10372, WUBM-273ACN(P12W) 12-pin Wafer + Printed Antenna conn.
This archive contains the Sparklan Linux Drivers 184.108.40.206 v4
Archive containing the Sparklan Windows Drivers
This archive contains the drivers for the SparkLan module WUBM-273ACN in linux.
How do we integrate SparkLan devices using Mediatek MT7612U chipset in Linux systems?
The Mediatek MT7612U chipset can be supported by the Linux in-kernels wireless drivers starting from kernel version 4.19.
(For older kernels please relate to driver source downloadable package "Sparklan Linux Drivers 220.127.116.11 v4" linked in the FAQ attached files section)
Usage of in-kernel driver in Linux kernel 4.19 and later:
Plug in the device and check if the correct Linux driver module is loaded correctly for the wifi module by command lsusb and lsusb -t as bellow:
Bus 002 Device 005: ID 0e8d:7612 MediaTek Inc.
|__ Port 3: Dev 5, If 0, Class=Vendor Specific Class, Driver=mt76x2u, 5000M
If the "Driver=mt76x2u" is not shown the driver module fails to load correctly for the wifi module, please check with command dmesg if the device has been detected at all and if the firmware file have failed to load:
usb 2-3: USB disconnect, device number 2
usb 1-3: new high-speed USB device number 2 using xhci_hcd
usb 2-3: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
usb 2-3: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: 802.11ac WLAN
usb 2-3: Manufacturer: MediaTek Inc.
usb 2-3: SerialNumber: 000000000
usb 2-3: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
mt76x2u 2-3:1.0: ASIC revision: 76120044
mt76x2u 2-3:1.0: Direct firmware load for mediatek/mt7662u_rom_patch.bin failed with error -2
mt76x2u: probe of 2-3:1.0 failed with error -2
If that is the case, make sure to download the latest firmware files bellow from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/mediatek and place the firmware files in the directory:
Once in place, reboot the system or replug the USB device and the the correct driver should be loaded for the module.
Technology / Antenna Frequency: GSM 850/900/1800/1900, UMTS 2100, LTE 698-960/1710-2690, Wifi/Bluetooth 2400 | Mounting method: Adhesive, Screw | Antenna Location: External | VSWR: 2.5 :1 | Gain: 2 dBi | Connector Type: SMA-M | Impedance: 50 Ohm | Cable length: 300 cm | Cable Specification: RG174 | Polarization: Linear | Max power: 50 W | Operating Temperature Range: -40 °C – 85 °C | Width: 49.6 mm | Length: 107.6 mm | Height: 37.6 mm
1 PCS PRICE $11.80
Technology / Antenna Frequency: GSM 850/900/1800/1900, UMTS 2100, Wifi/Bluetooth 2400, LTE 791-862/1710-2690 | Mounting method: Screw, Other | Antenna Location: Internal | VSWR: 2 :1 | Gain: 2.14 dBi | Connector Type: IPEX MHF/U.FL | Impedance: 50 Ohm | Cable length: 10 cm | Polarization: Linear | Max power: 25 W | Operating Temperature Range: -40 °C – 85 °C | Width: 8.5 mm | Length: 113 mm | Height: 113 mm
1 PCS PRICE $6.70