TECHSHIP IS A GLOBAL SUPPLIER OF WIRELESS COMPONENTS
The Techship Starter kit for Huawei MU709s is a complete easy-to-use testing platform for the Huawei MU709s.
The starter kit uses a Mini PCI Express to USB adapter board and
standard SIM card push connector with external power cable for USB power adapters included.
Besides the board this kit contains 2 pcs u.fl.-SMA-F interface cables, 2 pcs T-blade antennas and 1 pcs Huawei MU709s-2p mPCIe module.
For more information about Huawei MU709s please see 10251, Huawei MU709s-2p mPCIe.
This guide will make it easier to migrate from one Huawei module to another. This version also includes the ME909s modules.
This archive contains the Windows drivers V.6.00.12.00 for Huawei module MU709
This archive contains the Huawei AT commands over MBIM interface tool used for Windows 8-10 systems to send AT commands to cellular modules not exposing the AT/Modem serial interface endpoints.
This archive contains the Windows drivers V.5.05.02.302 for Huawei module MU709
This archive contains the Huawei MU709s series 11.652.69.00.00 Linux local full and delta firmware update files and release notes
This archive contains the Huawei MU709s series 11.652.69.00.00 Windows firmware updater and release notes.
What Linux kernel modules and configs are commonly used for communicating with cellular modules over their USB interface?
Most cellular modules can be supported in Linux by using som of the in-kernel drivers. The physical data interface to the host Linux system is usually done over USB which enumerates a set of different endpoints/interfaces. A set of serial interfaces for Modem/PPP, AT commands, NMEA location data and chipset debug information are almost always available in all configurations.
In addition some type of network endpoint/interface are also available and exposed. This can vary between manufacturers and chipset vendors and can also commonly be configurable by using USB configuration mode switching or through vendor specific AT commands.
Recommended kernel configurations to enable are listed bellow. Many cellular modules base their Linux support on these modules and drivers. Once included in the kernel build, the USB interfaces will be detected and bound correctly out-of-the-box or after applying source code patches to the driver modules.
Configs for USB serial drivers:
Configs for Modem/PPP support:
Configs for USB network drivers:
Please relate to the Techship product specific web pages for vendor specific Linux integration guides.
Below is a selection of kernel commits relating to cellular module support in Linux kernels:
qmi_wwan: Add support for Fibocom NL678 series
qmi_wwan: Added support for Telit LN940 series
qmi_wwan: Added support for Fibocom NL668 series
USB: serial: option: add support for GosunCn ME3630 RNDIS mode
USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)
USB: serial: option: add Fibocom NL678 series
USB: serial: option: add Telit LN940 series
USB: serial: option: add Fibocom NL668 series
USB: serial: option: add GosunCn ZTE WeLink ME3630
qmi_wwan: apply SET_DTR quirk to the SIMCOM shared device ID
If you use any of the listed cellular modules, drivers and specified USB modes in the commits above, ensure that your kernel version already include the patch or apply it to your build.
Why is there no serial interface for AT-commands available in Microsoft Windows 8/10 and newer, while in Windows 7 all the traditional module serial interfaces are available?
Microsoft demands cellular module vendors to use the Mobile Broadband Interface Model (MBIM) interface for signaling in newer operating systems like Windows 8 and 10 rather than the previous serial based control channels with AT commands.
The serial ports are phased out and enumeration in the host system of these are dropped by many manufacturers because of Microsofts requirements.
The connections can be controlled graphically in Windows by the systems built in connection manager as well as by commands in the command prompt starting with: netsh mbn
Microsoft: Overview of mobile broadband