TECHSHIP IS A GLOBAL SUPPLIER OF WIRELESS COMPONENTS
The Telit HE910-G miniPCIe module covers global frequency bands in 3G/UMTS with support for HSPA+ data speeds. It include quad band GSM/GPRS fallback and has built in GPS/GNSS functionality plus the ability to perform CS voice calls.
The product family introduces the first hepta-band HSPA+ modules in the market incorporating a 2G/3G solution built on 40nm CMOS technology. The HE910 includes features like HSDPA 21.0 Mbps (Cat 14), HSUPA 5.7 Mbps (Cat 6), digital voice interface, circuit switched data transfer, phonebook and SMS support, embedded TCP/IP protocol stack and custom Telit AT commands.
Due to its low power consumption and advanced connectivity features, HE910 is particularly suitable for applications such as industrial applications, mobile computing devices, table PCs and electronics in general, both for business and personal life.
This document contains an overview of the Telit xE910 series miniPCIe modules.
This overview document shows the technical differences between Telit HSPA+/3G modules.
Scope of this document is to give an overview of the Telit HE910 family, which can support GSM/GPRS/EDGE and WCDMA/HSPA with data/voice capabilities and optional GPS.
The aim of this document is the description of some hardware solutions useful for developing a product with the Telit HE910 module.
The aim of this document is the description of some hardware solutions useful for developing a product with the Telit xE910 Mini PCIe Adapter.
Scope of this document is to give an overview of the good rules to integrate a 2G, 3G, 4G modem with its antenna into a board, posing particular attention on the common pitfalls and best practices.
This document covers the more significant standard and proprietary AT commands provided by Telit's modules. Several module features are described and for each one of them the related AT commands are explained through examples. This document is not an exhaustive description of the AT commands implemented on the Telit's modules series, its target is only to give you an entry point to the AT commands world.
This document is aimed in providing an detailed specification and a comprehensive listing as a reference for the whole set of AT command.
This document describes the integration steps of the cellular modules USB endpoints in Linux systems.
This archive contains the GPS week number roll over issue notice and application note describing on the problem scenario and affected product variants.
The present document provides a guideline to connect logically the physical serial ports of the module to the services supported by the module itself (GPS, Python, etc.). It is up to the user to configure the module in suitable way to avoid hardware/software resources conflicts. With the generic "ports/services arrangement" expression is intended each possible set of logical connections regarding physical ports and Service Access Points supported by the used module (e.g. AT0, AT1, AT2, TT, PYSER, etc.).
Application note describing how to use NetworkManager in Linux with Telit Modems
Application note describing how to use ModemManager in Linux with Telit Modems
SIM Integration Design Guide Application Note for Telit modules r13
This Zip Archive of Telit 3G Modules Application Notes contains the following documents:
Telit_HE910_UE910_UL865 DVI_Application_ Note_r6
This archive contains the following Telit IoT AppZone Application Notes Documents:
Telit AppZone C User Guide.pdf
Telit AppZone C API Reference Guide.pdf
Telit AppZone for Android Developer Guide.pdf
Telit AppZone for Android Getting Started Guide.pdf
Telit AppZone Linux API Reference Guide.pdf
Telit AppZone Linux User Guide.pdf
Telit AppZone Python API Reference.pdf
Telit AppZone Python User Guide.pdf
This archive contains the certificate and declaration of conformity documents for:
Telit HE910-GL Declaration of Conformity
This archive contains the Telit XFP Firmware Update Tool installer used to update the firmware on Telit Cellular modules over USB-serial interface.
This archive contains the Windows 10 WHQL certified Telit module drivers for both x86 and x64 system platforms.
Zip archive with Telit cellular modules USB drivers installers for Windows 7, 8.x, 10 both x86 and x64 system architectures.
(Non WHQL certified drivers).
This archive contains the Telit AT controller tool as well as XFP firmware update tool for Microsoft Windows systems.
It can be used to troubleshoot, test and command the Telit cellular module in a graphical interface.
This archive contains the Windows installer for the Telit Mobile Broadband Connection Tool verison 2.7.1
This archive contains the Telit Connection Manager installer for Microsoft Windows systems
This document is intended for customers who want to integrate Telit’s Cloud functionalities in their systems/microcontrollers, without the necessity to use Telit modules that embed those functionalities. Any module that can provide a network connectivity can be used. N.B.: HTTP socket are required.
This archive contains the Windows CE 7 Telit module drivers and user guide.
This archive contains the Microsoft Windows CE 6 Telit module drivers and user guide.
This archive contains the Telit HE910-D and HE910-G series cellular module firmware V.12.00.xx9 update binary files and release note.
This archive contains the Telit HE910 firmware update binary file used by Telit XFP firmware update tool available for several host operating systems.
What Linux kernel modules and configs are commonly used for communicating with cellular modules over their USB interface?
Most cellular modules can be supported in Linux by using som of the in-kernel drivers. The physical data interface to the host Linux system is usually done over USB which enumerates a set of different endpoints/interfaces. A set of serial interfaces for Modem/PPP, AT commands, NMEA location data and chipset debug information are almost always available in all configurations.
In addition some type of network endpoint/interface are also available and exposed. This can vary between manufacturers and chipset vendors and can also commonly be configurable by using USB configuration mode switching or through vendor specific AT commands.
Recommended kernel configurations to enable are listed bellow. Many cellular modules base their Linux support on these modules and drivers. Once included in the kernel build, the USB interfaces will be detected and bound correctly out-of-the-box or after applying source code patches to the driver modules.
Configs for USB serial drivers:
Configs for Modem/PPP support:
Configs for USB network drivers:
Please relate to the Techship product specific web pages for vendor specific Linux integration guides.
Below is a selection of kernel commits relating to cellular module support in Linux kernels:
qmi_wwan: Add support for Fibocom NL678 series
qmi_wwan: Added support for Telit LN940 series
qmi_wwan: Added support for Fibocom NL668 series
USB: serial: option: add support for GosunCn ME3630 RNDIS mode
USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)
USB: serial: option: add Fibocom NL678 series
USB: serial: option: add Telit LN940 series
USB: serial: option: add Fibocom NL668 series
USB: serial: option: add GosunCn ZTE WeLink ME3630
qmi_wwan: apply SET_DTR quirk to the SIMCOM shared device ID
If you use any of the listed cellular modules, drivers and specified USB modes in the commits above, ensure that your kernel version already include the patch or apply it to your build.
How to collect initial diagnostics data and logs for Telit cellular modules needed when requesting Techship technical support?
In order to ease the troubleshooting of technical problems and understand your end-product or application and its usage scenario we ask you to please provide the following information when creating a technical support ticket at: techship.com/technical_support/
Please give a detailed problem description and in what precise circumstances it is present.
Describe the host system:
-Hardware (system board, processor architecture, other peripheral devices...)
-Operating system with detailed versions (E.g. Windows version and build, Linux distribution, kernel version)
-Drivers used and versions (Linux: out-of-tree vendor drivers or in-kernel drivers?)
Details from the cellular module label:
-SKU/BOM or P/N code
For Linux systems, capture terminal logs from commands:
ls -l /dev/serial/by-id
ls -l /sys/bus/usb-serial/devices
The cellular module logs can be acquired by accessing one of the USB enumerated serial (COM) interfaces or physical UART serial interfaces accepting AT commands. In Windows device manager they are generally found as modem infterface or serial and ports interface types).
Send AT commands to module and capture the text output:
Test that you get a OK reply:
Enable AT command echo:
Verbose error reporting:
USB endpoint configuration:
Serial port configuration:
Selected network access techniques:
List network operator info:
Network registration status:
Last serving cell network information:
Current network status:
List APN details:
List Packet switch enable/disable status:
List PDP profiles status:
List default data connection details:
List bearers and IP addresses:
Additional test commands for Telit LM940/LM960:
UMTS Bands: B1 (2100), B8 (900) | MIMO (Multiple-Input Multiple-Output): Yes | LTE Bands: B1 (2100), B3 (1800), B7 (2600), B8 (900), B20 (800DD), B38 (TDD 2600), B40 (TDD 2300) | GSM/EDGE Bands: B8 (900), B3 (1800) | Manufacturer: SIMCom | LTE Region: Europe | FOTA Firmware Updates: No | Form Factor: mPCIe - full size | Technology: LTE - cat 3 | Antenna Interface: IPEX MHF/U.FL | GPS: Yes | GNSS technology: GPS, GLONASS | Max DL Speed: 100 Mbps | Max UL Speed: 50 Mbps | Chipset: MDM9215 | Operating Temperature Range: -30 °C – 80 °C | Driver Support: Windows 7, Windows XP, Windows Vista, Linux, Android, Windows 8, Windows CE, Windows 8.1 | Interface: USB 2.0 | Voice Call Support: Yes | GNSS antenna support: Passive, Active 3.05VDC | SIM interface: Through miniPCIe connector | GPIO: Yes | Extended Operating Temperature Range: -30 °C – 80 °C | Audio interface: Digital PCM signal input/output in socket, Digital PCM signal over USB interface | Certification: CE, CE RED | Size: 30x30x2.9 mm
1 PCS PRICE $59.00
Technology / Antenna Frequency: GSM 850/900/1800/1900, UMTS 2100 | Mounting method: Adhesive, Screw | Antenna Location: External | VSWR: 3 :1 | Gain: 0 dBi | Connector Type: SMA-M | Impedance: 50 Ohm | Cable length: 300 cm | Cable Specification: RG174 | Polarization: Linear | Max power: 25 W | IP Class: IP69 | Operating Temperature Range: -40 °C – 85 °C | Height: 18 mm | Diameter: 50 mm
1 PCS PRICE $9.90
Manufacturer: Compex | Wifi Standard: 802.11a/b/g/n/ac | Wifi Frequency: 2.4 GHz, 5 GHz | Form Factor: mPCIe - full size | Wifi Antenna: 3T3R MIMO | Max output power: 19 dBm | Chipset: Qualcomm, Atheros, QCA9880 | Operating Temperature Range: -20 °C – 70 °C | Driver Support: Linux, OpenWRT, In-kernel ath10k | Width: 30 mm | Interface: PCIe | Length: 50 mm
1 PCS PRICE $33.50
Technology / Antenna Frequency: GSM 850/900/1800/1900, UMTS 2100, Wifi/Bluetooth 2400, LTE 790-960/1710-2690 | Mounting method: Connector | Antenna Location: External | Connector Type: SMA-M | Impedance: 50 Ohm | Polarization: Vertical | Max power: 50 W | Width: 21 mm | Length: 157 mm | Height: 157 mm
1 PCS PRICE $7.30
Technology / Antenna Frequency: GSM 850/900/1800/1900, UMTS 2100, Wifi/Bluetooth 2400, LTE 791-862/1710-2690 | Mounting method: Screw, Other | Antenna Location: Internal | VSWR: 2 :1 | Gain: 2.14 dBi | Connector Type: IPEX MHF/U.FL | Impedance: 50 Ohm | Cable length: 10 cm | Polarization: Linear | Max power: 25 W | Operating Temperature Range: -40 °C – 85 °C | Width: 8.5 mm | Length: 113 mm | Height: 113 mm
1 PCS PRICE $6.70
Technology / Antenna Frequency: GPS 1575.42 | Active/Passive GPS: Passive | Mounting method: Other | Antenna Location: Outdoor, External | VSWR: 1.5 :1 | Gain: 3.5 dBi | Connector Type: SMA-M | Impedance: 50 Ohm | Cable length: 250 cm | Cable Specification: RG174 | Polarization: RHCP (GPS) | IP Class: IP67 | Operating Temperature Range: -40 °C – 85 °C | Width: 34 mm | Length: 41 mm | Height: 13.7 mm
1 PCS PRICE $4.90