TECHSHIP IS A GLOBAL SUPPLIER OF WIRELESS COMPONENTS
Telit LE910-EU1 LTE CAT-1 LGA module is members of Telit’s flagship xE910 module family delivering 4G radio access technology in the 28.2 x 28.2 x 2.2 mm family form factor . The Telit Unified Form Factor Family is comprised of products sharing a common form factor as well as electrical and programming interfaces which allows developers to implement a “design once, use anywhere” strategy.
Start your testing with 10789 Telit LE910-EU1 LTE CAT-1 Developer Kit
The LE910-EU1 modules key benefits:
- Easy to integrate with peripherals and actuators using USB 2.0 HS, UART and user definable GPIOs.
- Ideal platform for IoT applications and devices with ultra-compact design and extended operating temperature range.
- Internet friendly with integrated TCP/IP and UDP/IP stacks, as well as HTTP, SMTP, FTP, SSL.
- Simple drop-in migration and technology design reuse path to 2G and 3G with any xE910 module.
- Over-the-Air firmware update.
Scope of this document is to give an overview of the good rules to integrate a 2G, 3G, 4G modem with its antenna into a board, posing particular attention on the common pitfalls and best practices.
Purpose of this document is providing a detailed specification and a comprehensive listing as a reference for the whole set of AT command for the LE910 V2 series (LTE/3G/2Gmodules)
This document covers the more significant standard and proprietary AT commands provided by Telit's modules. Several module features are described and for each one of them the related AT commands are explained through examples. This document is not an exhaustive description of the AT commands implemented on the Telit's modules series, its target is only to give you an entry point to the AT commands world.
The present document provides a guideline to connect logically the physical serial ports of the module to the services supported by the module itself (GNSS, AppZone, etc.). It is up to the user to configure the module in suitable way to avoid hardware/software resources conflicts. With the generic "ports/services arrangement" expression is intended each possible set of logical connections regarding physical ports and Service Access Points supported by the used module (e.g. AT0, AT1, AT2, etc.).
This document describes the integration steps of the cellular modules USB endpoints in Linux systems.
This document provides a guideline to configure a Telit module and the connected PC to run the NCM protocol on the USB port used to connect the devices.
Application note describing how to use NetworkManager in Linux with Telit Modems
Application note describing how to use ModemManager in Linux with Telit Modems
SIM Integration Design Guide Application Note for Telit modules r13
This archive contains the following Telit IoT AppZone Application Notes Documents:
Telit AppZone C User Guide.pdf
Telit AppZone C API Reference Guide.pdf
Telit AppZone for Android Developer Guide.pdf
Telit AppZone for Android Getting Started Guide.pdf
Telit AppZone Linux API Reference Guide.pdf
Telit AppZone Linux User Guide.pdf
Telit AppZone Python API Reference.pdf
Telit AppZone Python User Guide.pdf
This archive contains the Windows 10 WHQL certified Telit module drivers for both x86 and x64 system platforms.
Zip archive with Telit cellular modules USB drivers installers for Windows 7, 8.x, 10 both x86 and x64 system architectures.
(Not WHQL certified drivers).
This archive contains the Telit AT controller tool as well as XFP firmware update tool for Microsoft Windows systems.
It can be used to troubleshoot, test and command the Telit cellular module in a graphical interface.
This archive contains the Telit XFP Firmware Update Tool installer used to update the firmware on Telit Cellular modules over USB-serial interface.
This archive contains the Windows installer for the Telit Mobile Broadband Connection Tool verison 2.7.1
This archive contains the Telit Connection Manager installer for Microsoft Windows systems
This document is intended for customers who want to integrate Telit’s Cloud functionalities in their systems/microcontrollers, without the necessity to use Telit modules that embed those functionalities. Any module that can provide a network connectivity can be used. N.B.: HTTP socket are required.
This archive contains the Windows CE 7 Telit module drivers and user guide.
This archive contains the Microsoft Windows CE 6 Telit module drivers and user guide.
How to set up a simple data connection over the MBIM interface using libmbim and driver cdc_mbim in Linux?
Most 4G/LTE cellular modules implements the USB Implementers Forums Mobile Broadband Interface Model (MBIM) Interface. This because Microsoft request cellular module vendors to include the MBIM interface for good compatibility with Windows 8, 8.1, 10 and later systems. The Windows built-in connection manager also rely on MBIM interface for control of the cellular modules.
There is a open source Linux in-kernel driver supporting MBIM interface and it is called cdc_mbim. The library libmbim can be used to communicate with the cellular devices over the interface and do necessary configurations to trigger the data connection over the cellular network.
First install the libmbim Linux library using your system package manager like apt etc. (more details about libmbim here: https://www.freedesktop.org/wiki/Software/libmbim/)
Please relate to the FAQ bellow regarding how to set the cellular module into correct USB mode for usage with MBIM mode:
How to change USB composition mode to MBIM in cellular module, used by Windows 8 and 10 systems for data connectivity?
Verify that you have the Linux in-kernel cdc_mbim driver installed for the cellular modules exposed MBIM interface endpoint over USB:
Can look e.g. like this:
|__ Port 1: Dev 12, If 12, Class=Communications, Driver=cdc_mbim, 480M
|__ Port 1: Dev 12, If 13, Class=CDC Data, Driver=cdc_mbim, 480M
Using libmbim with the command line interface mbimcli:
List all available options for mbimcli:
The cellular modules mbim interface is usually named cdc-wdm* among the devices. For mbimcli this is defined by --device=/dev/cdc-wdm0 parameter. You should also use the proxy function to enable parallel commands to be sent to module even if the interface already is in use by a data connection. This is done by including --device-open-proxy or -p in every mbimcli requst to module.
Command example to query device capabilities and information (firmware & IMEI code etc.):
mbimcli --device=/dev/cdc-wdm0 --device-open-proxy --query-device-caps
The libmbim tool: mbim-network can be used to establish a simple data connection.
First create a config file containing your network operators APN details. Save it in the default location where mbim-network searches for the file: /etc/mbim-network.conf . The parameter --profile=[PATH] can be used to alter this path when executing mbim-network.
Save the APN details, (and username, password and authentication type if necessary) into the configuration file /etc/mbim-network.conf:
If the APN requires a username and password then it is also required to fill in the APN_AUTH protocol type with either PAP, CHAP or MSCHAPV2.
How to start a data connection after configuration file is in place:
Enter SIM PIN (if necessary for SIM card):
mbimcli -d /dev/cdc-wdm0 -p --enter-pin=1234
Start the mbim data connection with command bellow, if successful it will print "Network started successfully"
mbim-network /dev/cdc-wdm0 start
You can now execute the mbim-set-ip script (download found bellow related to this FAQ) with sufficient system privileges:
./mbim-set-ip /dev/cdc-wdm0 wwan0
This script will collect the network interface IP configurations from the cellular module over MBIM interface using mbimcli, parse them and apply them to the network interface in Linux, this because DHCP requests are generally not supported over MBIM interfaces.
Once you have started the data connection and set the details with the mbim-set-ip script you should be able to ping the data connection:
IPv4 ping: (only supported if IPv4 address was acquired from cellular module)
ping -4 -I wwan0 22.214.171.124
ping -4 -I wwan0 google.com
IPv6 ping: (only supported if IPv6 address was acquired from cellular module)
ping -6 -I wwan0 2001:4860:4860::8888
ping -6 -I wwan0 google.com
The cellular data connection can be disconnected by commands:
Stop mbim data connection:
mbim-network /dev/cdc-wdm0 stop
Set network interface down:
ip link set wwan0 down
Other useful commands:
Query device capabilities and information (firmware & IMEI code etc.):
mbimcli -d /dev/cdc-wdm0 -p --query-device-caps
Query SIM card information:
mbimcli -d /dev/cdc-wdm0 -p --query-subscriber-ready-status
Query network registration state:
mbimcli -d /dev/cdc-wdm0 -p --query-registration-state
Query connection ip information:
mbimcli -d /dev/cdc-wdm0 -p --query-ip-configuration=0
How to collect initial diagnostics data and logs for Telit cellular modules needed when requesting Techship technical support?
Solution: In order to troubleshoot and solve a technical problem, we ask you to please provide information about your system and logs from the related Telit module when creating a technical support ticket.
Problem description of what exact problem is and in what precise situations present.
Describe the host system:
-Hardware (system board, peripherals...)
-Operating system and detailed versions (E.g. Windows, Linux release, kernel...)
-Drivers and driver versions
Identify the precise details of cellular module found on label:
-SKU/BOM or P/N code
(For RMA returns the IMEI number is required also)
If you are running on a Linux based system, please capture the terminal logs bellow:
ls -l /dev/serial/by-id
ls -l /sys/bus/usb-serial/devices
The logs from module firmware can be acquired by accessing one of the USB enumerated serial (COM) interfaces accepting AT commands. (In Windows this is generally modem devices or AT commands serial interfaces). Send the following commands to module and capture the text output and include them when creating the the technical support ticket.
Test that you get a OK reply:
Enable AT command echo:
Verbose error reporting:
USB endpoint configuration:
Serial port configuration:
Selected network access techniques:
List network operator info:
Network registration status:
Last serving cell network information:
Current network status:
List APN details:
List Packet switch enable/disable status:
Enable Packet Switched functionality:
List PDP profiles status:
List default data connection details:
List bearers and IP addresses:
Additional test commands for Telit LM940/LM960:
The support ticket can be created after login at: https://techship.com/technical_support/
How can we establish data connection for cellular modules in Windows 8 and Windows 10 systems?
Microsoft Windows desktop versions starting from Windows 8 and newer have built in data connection manager for WWAN, Wifi etc. that can be used to configure, control and establish the data connection of cellular module that support MBIM interface, which most cellular modules do.
The connection managers settings and controls can be found and accessed on Windows desktop start menu through the network icon (see picture).
The Cellular tab can be found in Windows system settings and if needed the connection APN details can be manually entered through "Advanced options".