TECHSHIP IS A GLOBAL SUPPLIER OF WIRELESS COMPONENTS
Telit LE910C1-EU is intended for the European market.
It is 3GPP release 10 compliant and comes with simultaneous support of GPS, Glonass, Bei-dou, Galileo, QZSS.
• Standard Mini PCIe Data-card form factor
• SIM card holder
• Best-in class 3GPP Rel. 10 platform
• Easy to integrate with peripherals and actuators using USB 2.0 HS, UART and user definable GPIOs
• Battery-friendly 1.8V GPIO
• Ideal platform for IoT applications and mobile data and computing devices with ultra-compact design and extended operating temperature range
• Internet friendly with integrated TCP/IP and UDP/IP stacks
• Simple drop-in migration and technology design reuse path to 2G and 3G with any xE910 module
• Over-the-Air firmware update
Designers looking to add LTE capabilities to commercial and industrial computing devices benefit from the simple, yet powerful mPICe form factor with the flexibility to choose another technology best suited for the application environment from any one of the other models in the xE910 mPCIe series.
Datasheet for Telit LE910Cx series
SMT LGA Form Factor Module Hardware Design Guide for the Telit LE910Cx series
Hardware design guide for Telit LE910Cx-mPCIe series.
User guide describing the software interface of Telit LE910Cx series modules.
Purpose of this document is providing a detailed specification and a comprehensive listing as a reference for the whole set of AT command for the LE910Cx-series
This document describes the integration steps of the cellular modules USB endpoints in Linux systems.
Voice over LTE (VoLTE) call application note.
Application note for voice audio transmission over USB interface of the Telit LE910Cx series.
Application Note for the Telit digital voice interface.
This archive contains the Windows 10 WHQL certified Telit module drivers for both x86 and x64 system platforms.
Zip archive with Telit cellular modules USB drivers installers for Windows 7, 8.x, 10 both x86 and x64 system architectures.
(Non WHQL certified drivers).
This archive contains the Telit LE910Cx TFI firmware updater tool and related release notes
How to collect initial diagnostics data and logs for Telit cellular modules needed when requesting Techship technical support?
In order to ease the troubleshooting of technical problems and understand your end-product or application and its usage scenario we ask you to please provide the following information when creating a technical support ticket at: techship.com/technical_support/
Please give a detailed problem description and in what precise circumstances it is present.
Describe the host system:
-Hardware (system board, processor architecture, other peripheral devices...)
-Operating system with detailed versions (E.g. Windows version and build, Linux distribution, kernel version)
-Drivers used and versions (Linux: out-of-tree vendor drivers or in-kernel drivers?)
Details from the cellular module label:
-SKU/BOM or P/N code
For Linux systems, capture terminal logs from commands:
ls -l /dev/serial/by-id
ls -l /sys/bus/usb-serial/devices
The cellular module logs can be acquired by accessing one of the USB enumerated serial (COM) interfaces or physical UART serial interfaces accepting AT commands. In Windows device manager they are generally found as modem infterface or serial and ports interface types).
Send AT commands to module and capture the text output:
Test that you get a OK reply:
Enable AT command echo:
Verbose error reporting:
USB endpoint configuration:
Serial port configuration:
Selected network access techniques:
List network operator info:
Network registration status:
Last serving cell network information:
Current network status:
List APN details:
List Packet switch enable/disable status:
List PDP profiles status:
List default data connection details:
List bearers and IP addresses:
Additional test commands for Telit LM940/LM960:
How-to change the cellular modulesUSB composition mode to Mobile Broadband Interface Model (MBIM) used by Windows 8 and 10 systems for controlling and establishing data connectivity through the built-in connection manager in Windows?
This is done by sending a set of AT commands to the cellular modules Modem or AT serial interface found in Windows Device Manager. Please see list below for associated AT commands.
(For additional details, refer to the product specific software, ports, and AT commands guides found on the Techship product web pages under technical documentation tab).
After the AT commands have been received by the module and has restarted, the USB interface endpoint composition should have changed to include MBIM interface as well.
You can find the correct Serial COM port number by checking Windows Device Manager, under the Modems drop down -> (right click and see properties for selected COM port info) or under the Ports (COM & LPT) drop down.
Vendor specific commands to use:
Sierra Wireless EM75xx series module:
Sierra Wireless EM74xx, MC74xx series module:
Sierra Wireless EM73xx, MC73xx series module:
Simcom SIM7100, SIM7500 and SIM7600 series modules:
ZTE Welink ME3630 series:
Telit LE910C1 and LE910C4 series:
Telit LM940 and LM940A11:
Telit LM960 and LM960A18:
Telit LE910 V2 series:
On Huawei and Telit LN94x series modules the USB mode changing is done automatically by the modules Windows drivers based on current Windows version.
Please be aware that some USB mode configurations do not include any serial interfaces, making it impossible to revert the changes using AT commands.
How can we establish data connection for cellular modules in Windows 8 and Windows 10 systems?
Microsoft Windows desktop versions starting from Windows 8 and newer have built in data connection manager for WWAN, Wifi etc. that can be used to configure, control and establish the data connection of cellular module that support MBIM interface, which most cellular modules do.
The connection managers settings and controls can be found and accessed on Windows desktop start menu through the network icon (see picture).
The Cellular tab can be found in Windows system settings and if needed the connection APN details can be manually entered through "Advanced options".