Name: Telit LE910C4-LA LTE CAT-4 mPCIe
Brand: Telit IoT Solutions Inc.
SKU: 11294

How to configure and save a "User Profile" using AT-commands on selected Telit modems

Question

How to configure and save a "User Profile" using AT-commands on selected Telit modems.

Solution

Sometimes you might want to store some settings to be automatically loaded on startup, without having to configure your modem or make a script.
Fortunately Telit has made it easy to do this, by creating a "User Profile", and this FAQ will guide you through on how to set this up.

For this example, we'll make some configurations to the GPS settings of the module, but you can choose whichever settings you like.

First, send the AT command:

AT&V0?

You will get a long list with info, but the one I want you to check is the last one:

DEFAULT PROFILE                : &Y0=user profile 1

Make note of the "Y0" - This might be different on your setup, but don't worry, we'll change this in the next step.

Send the following AT command:

AT&P0

This sets the modem to a custom user profile. (There are 2 user profiles available, "0" and "1". We are using "0" here.)

Now check that we have updated the profile with the AT command:

AT&V0?

And now it should say at the bottom:

DEFAULT PROFILE                : &P0=user profile 1

Great! Now we're editing our user profile, so go ahead and type your settings:

AT$GPSP=1
AT$GPSANTPORT=3
AT$GPSACP
AT$GPSNMUN=1
AT$GPSNMUN=1,1,1,1,1,1,1
AT$GPSSAV

To save these settings, it's not enough to only type "AT$GPSSAV", we need to save some of the settings to our profile!

Type the following AT command to do a "save profile":

AT&W

Now do a reboot with:

AT#REBOOT

And when it's up and running again type:

AT$GPSNMUN?

And it should say:

$GPSNMUN: 1,1,1,1,1,1,1

Microsoft Windows desktop versions starting from Windows 8 and newer have built in data connection manager for WWAN, Wifi etc. that can be used to configure, control and establish the data connection of cellular module that support MBIM interface, which most cellular modules do.

The connection managers settings and controls can be found and accessed on Windows desktop start menu through the network icon (see picture).

The Cellular tab can be found in Windows system settings and if needed the connection APN details can be manually entered through "Advanced options".

Images

In order to ease the troubleshooting of technical problems and understand your end-product or application and its usage scenario we ask you to please provide the following information when creating a technical support ticket at: techship.com/technical_support/

Please give a detailed problem description and in what precise circumstances it is present.

Describe the host system:
-Hardware (system board, processor architecture, other peripheral devices...)
-Operating system with detailed versions (E.g. Windows version and build, Linux distribution, kernel version)
-Drivers used and versions (Linux: out-of-tree vendor drivers or in-kernel drivers?)

Details from the cellular module label:
-Model
-SKU/BOM or P/N code
IMEI number

For Linux systems, capture terminal logs from commands:
uname -a
lsusb
lsusb -t
ifconfig -a
ls -l /dev/serial/by-id
ls -l /sys/bus/usb-serial/devices
dmesg

The cellular module logs can be acquired by accessing one of the USB enumerated serial (COM) interfaces or physical UART serial interfaces accepting AT commands. In Windows device manager they are generally found as modem infterface or serial and ports interface types).

Send AT commands to module and capture the text output:
Test that you get a OK reply:
AT
Enable AT command echo:
ATE1
Verbose error reporting:
AT+CMEE=2
Module model:
AT+CGMM
Firmware version:
AT+CGMR
IMEI Code:
AT+CGSN
USB endpoint configuration:
AT#USBCFG?
Serial port configuration:
AT#PORTCFG?
Operational mode:
AT+CFUN?
Selected network access techniques:
AT+WS46?
List network operator info:
AT+COPS?
Network registration status:
AT+CREG?
AT+CGREG?
AT+CEREG?
Signal strength:
AT+CSQ
Last serving cell network information:
AT#SERVINFO
Current network status:
AT#RFSTS
List APN details:
AT+CGDCONT?
List Packet switch enable/disable status:
AT+CGATT?
List PDP profiles status:
AT+CGACT?
List default data connection details:
AT#BND?
List bearers and IP addresses:
AT+CGCONTRDP=
AT+CGPADDR=
AT#FWSWITCH?
AT#SWPKGV
AT#GAUTH?
AT#CGPADDR=
AT#AUTOBND?
AT#AUTOATT?

Additional test commands for Telit LM940/LM960/FN98x:
AT#FIRMWARE
AT#FIRMWARE?
AT#GETFW
AT#ACTIVEFW?
AT#CACTL?
AT#RXDIV?
AT#RXTOGGLE?
AT#LRXDIV?
AT#LCFC
AT#TEMPSENS?
AT#GPIO?
AT#HWREV
AT#QSS?
AT#USB3TUNE?
AT#USBSWITCH?

Images

Related products

Telit LM960 LTE CAT-18, GPS, mPCIe
Telit LN941 LTE CAT-6, M.2
Telit LE910C4-NF LTE CAT-4 mPCIe
Telit LE910-NA V2 LTE CAT-4, S.SKU LGA
Telit LE910B1-NA S.SKU LTE Cat-1 LGA
Telit LE910C1-NS LTE CAT-1 Sprint mPCIe
Telit LE910-SVL LTE CAT-1
Telit HE910-GL HSPA+ LGA
Telit ME910C1-NV LTE CAT-M1 Verizon LGA
Telit ME910C1-NV GNSS LTE CAT-M1 Verizon LGA
Telit LE910C1-NA Interface Board
Telit UE910-NAD AT&T 3G LGA
Telit LE910-SVG LTE CAT-3 LGA
Telit HE910-NAR HSPA LGA
Telit HE910-D HSPA+ LGA
Telit LE910C1-NA LTE CAT-1 AT&T LGA
Telit LE910C1-NS LTE CAT-1 Sprint LGA
Telit LE910-NAG LTE CAT-3 AT&T LGA
Telit LE910-SVG LTE CAT-3 mPCIe
Telit LE910-NVG LTE CAT-3 LGA
Telit LE910C4-EU LTE CAT-4 mPCIe
Telit LE910C4-EU LTE CAT-4 mPCIe SIM
Telit LE910C1-NF S.SKU LTE CAT-1 LGA
Telit LM960 Interface Board
Telit ME310G1-WW CAT-M1/NB-IoT S.SKU LGA
Telit ME910G1-WW CAT-M1/NB-IoT S.SKU LGA
Telit LE910C1-NF Interface board
Telit ME310G1-WW Interface board
Telit ME910G1-WW Interface Board
Telit LE910C4-NF LTE CAT-4 mPCIe SIM
Telit LM960A18 LTE CAT-18 mPCIe
Telit LE910C1-EU LTE CAT-1 mPCIe SIM
Telit LE910C1-AP LTE CAT-1 mPCIe SIM
Telit LE910C1-NF LTE CAT-1 mPCIe
Telit LE910C4-AP LTE CAT-4 mPCIe SIM
Telit LE910C4-CN LTE CAT-4 mPCIe
Telit LE910C4-CN LTE CAT-4 mPCIe SIM
Telit LE910C4-EU LTE CAT-4 LGA
Telit LE910C4-LA LTE CAT-4 mPCIe
Telit LE910C4-AP LTE CAT-4 LGA
Telit LN920A6-WW Cat-6 M.2
Telit LN920A12-WW Cat-12 M.2
Telit FN990A40 5G sub6 M.2
Telit FN990A28 5G sub6 M.2
Telit LE910C1-NF S.SKU LTE CAT-1 mPCIe SIM

Permanent link

Using NetworkManager and ModemManager in Linux to automatically establish a connection and configure IP details

Question

How to use NetworkManager and ModemManager in Linux to automatically establish a cellular data connection and configure IP details?

Solution

Using NetworkManager and ModemManager in Linux to automatically establish a connection and configure IP details

In this FAQ we will show how to set up NetworkManager to automatically configure, establish the cellular data connection in your system.

NetworkManager and ModemManager are open source tool for Linux to manage several types of networks and interfaces such as ethernet, wifi, etc. It can also manage cellular WWAN interfaces through the ModemManager tool.
It is hosted by the Freedesktop.org community and driven by Aleksander Morgado and other contributors. please visit https://wiki.gnome.org/Projects/NetworkManager and https://www.freedesktop.org/wiki/Software/ModemManager/ for latest information, source code, API reference manuals, debugging tips, contribution, mailing list etc.

ModemManager is capable of communicating over several types of device control channels such as QMI/RMNET, MBIM, MODEM / AT command etc. But support for vendor proprietary or out-of-kernel drivers are none or very limited. Such drivers are gobinet, simcom_wwan and other drivers provided by the vendors directly.

Many Linux distributions have NetworkManager and ModemManager pre-installed or they can typically easily be installed through the systems package manager.
In Ubuntu for example apt can install it for you by command if not already installed:
apt install network-manager

Check with commands below that you have both tools installed in system and their versions.
NetworkManager -V
ModemManager -V

ModemManager (and NetworkManager) are continuously developed for better compatibility with the cellular devices, therefore it is recommend to use a recent version of the tools and in case of problem situations, evaluate the latest versions from source and check the mailing list archives for possible discussions on the problem experienced.

Keep in mind that NetworkManager and ModemManager projects are not directly developed or driven by the cellular device vendors and the compatibility with the device you aim to use can be limited. Some vendors contribute with code to make their devices fully compatible, while others don't. Many cellular devices can be set to expose standardized types of USB network interface and control channel such as MBIM interface by USB-IF or the Qualcomm proprietary interface QMI that ModemManager will try to identify, and often manage to work successfully with but there are exceptions also.

Both NetworkManager and ModemManager have command line interfaces (nmcli and mmcli respectively) where you can interact with the management tools.

Relate to the following FAQ if you want more details for using ModemManager only to configure and control the cellular device but manually establish, maintain the connection and network interface IP address details.
How-to guide: control and set up a data connection in Linux using ModemManager as connection manager?

Have ModemManager list all the cellular device it has detected. Here we use the Alcatel IK41 series with MBIM interface in this example:
mmcli --list-modems
/org/freedesktop/ModemManager1/Modem/0 [Alcatel] Mobilebroadband

General details and status of them modem can be listed with "--modem" option.
mmcli --modem=0
-----------------------------
General | dbus path: /org/freedesktop/ModemManager1/Modem/0
| device id: 998e478c5b14c75e16bffe6abaacabef22fb2f5b
-----------------------------
Hardware | manufacturer: Alcatel
| model: Mobilebroadband
| firmware revision: MPSS.JO.2.0.2.c1.7-00004-9607_
| carrier config: default
| h/w revision: 0
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id:
-----------------------------
System | device: /sys/devices/pci0000:00/0000:00:14.0/usb3/3-1
| drivers: option1, cdc_mbim
| plugin: Generic
| primary port: cdc-wdm0
| ports: cdc-wdm0 (mbim), ttyUSB0 (at), ttyUSB2 (at), wwan0 (net),
| ttyUSB1 (qcdm)
-----------------------------
Status | lock: sim-pin
| unlock retries: sim-pin (3)
| state: locked
| power state: on
| signal quality: 0% (cached)
-----------------------------
Modes | supported: allowed: 2g; preferred: none
| allowed: 3g; preferred: none
| allowed: 4g; preferred: none
| allowed: 2g, 3g; preferred: 3g
| allowed: 2g, 3g; preferred: 2g
| allowed: 2g, 4g; preferred: 4g
| allowed: 2g, 4g; preferred: 2g
| allowed: 3g, 4g; preferred: 3g
| allowed: 3g, 4g; preferred: 4g
| allowed: 2g, 3g, 4g; preferred: 4g
| allowed: 2g, 3g, 4g; preferred: 3g
| allowed: 2g, 3g, 4g; preferred: 2g
| current: allowed: 2g, 3g, 4g; preferred: 2g
-----------------------------
Bands | supported: egsm, dcs, pcs, g850, utran-1, utran-8, eutran-1, eutran-3,
| eutran-7, eutran-8, eutran-20, eutran-28
| current: egsm, dcs, pcs, g850, utran-1, utran-8, eutran-1, eutran-3,
| eutran-7, eutran-8, eutran-20, eutran-28
-----------------------------
IP | supported: ipv4, ipv6, ipv4v6
-----------------------------
SIM | dbus path: /org/freedesktop/ModemManager1/SIM/0

Check that the cellular device is managed by NetworkManager by not having state "unmanaged" listed for it.
nmcli device status
DEVICE TYPE STATE CONNECTION
cdc-wdm0 gsm disconnected --
enp3s0 ethernet unmanaged --
lo loopback unmanaged --

Now you should create a connection profile in NetworkManager for your specific network carrier and SIM card with the "nmcli connection add" command:
For example:
nmcli connection add type gsm ifname '*' con-name '3-sweden' apn 'data.tre.se' connection.autoconnect yes gsm.pin 0000

- type is gsm for all typical cellular connections unless it is of cdma type.
- ifname is the control interface name, in this case cdc-wdm0, wildcard can be used also to have it autoselect.
- con-name is the profile name you want to give it.
- apn is provided by your network carrier and tells the modem what attach point it should use for the data connection.
- connection.autoconnect set to yes will make NetworkManager always try to auto connect and maintain this profile connection.
- gsm.pin lets you provide a pin code for the SIM card, that NetworkManager will try to use if PIN check is enabled for SIM card.

There are several additional commands and attributes available such as username and password settings for the APNs etc. Refer to the NetworkManager help and manual pages for full details on the commands.

If successful you should receive a reply similar to this one:
Connection '3-sweden' (cad6fcbf-2cb1-4796-b7e6-67b9f9635aef) successfully added.

You can check the status now by command:
nmcli device status
DEVICE TYPE STATE CONNECTION
cdc-wdm0 gsm connected 3-sweden
enp3s0 ethernet unmanaged --
lo loopback unmanaged --

Where connected should be listed as state if the connection establishment was successful.

If the connection is not successful or you want more details about the device and connection you can check commands:

You can list the current status with command:
nmcli radio
WIFI-HW WIFI WWAN-HW WWAN
enabled enabled enabled enabled

nmcli device show cdc-wdm
GENERAL.DEVICE: cdc-wdm0
GENERAL.TYPE: gsm
GENERAL.HWADDR: (unknown)
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.CONNECTION: 3-sweden
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/18
IP4.ADDRESS[1]: 2.68.73.130/30
IP4.GATEWAY: 2.68.73.129
IP4.ROUTE[1]: dst = 2.68.73.128/30, nh = 0.0.0.0, mt = 700
IP4.ROUTE[2]: dst = 0.0.0.0/0, nh = 2.68.73.129, mt = 700
IP4.DNS[1]: 80.251.201.177
IP4.DNS[2]: 80.251.201.178
IP6.ADDRESS[1]: 2a02:aa1:1017:6d11:1060:3dff:feac:e92f/64
IP6.ADDRESS[2]: 2a02:aa1:1017:6d11:6474:7254:7b72:eb09/64
IP6.GATEWAY: 2a02:aa1:1017:6d11:21e6:9049:6cfb:8ac3
IP6.ROUTE[1]: dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]: dst = 2a02:aa1:1017:6d11::/64, nh = ::, mt = 700
IP6.ROUTE[3]: dst = ::/0, nh = fe80::21e6:9049:6cfb:8ac3, mt = 1024
IP6.ROUTE[4]: dst = 2a02:aa1:1017:6d11::/64, nh = ::, mt = 256
IP6.ROUTE[5]: dst = ::/0, nh = 2a02:aa1:1017:6d11:21e6:9049:6cfb:8ac3, mt = 700
IP6.DNS[1]: 2a02:aa0::55
IP6.DNS[2]: 2a02:aa0::56

nmcli connection show
NAME UUID TYPE DEVICE
3-sweden e946017f-2e9c-477b-89ad-4c31e7331d65 gsm cdc-wdm0

Ifconfig should now show the related IP address details already set to the network interface by NetworkManager:
ifconfig
wwan0: flags=4291 mtu 1500
inet 2.68.73.130 netmask 255.255.255.252 broadcast 2.68.73.131
inet6 2a02:aa1:1017:6d11:6474:7254:7b72:eb09 prefixlen 64 scopeid 0x0
inet6 2a02:aa1:1017:6d11:1060:3dff:feac:e92f prefixlen 64 scopeid 0x0
ether 12:60:3d:ac:e9:2f txqueuelen 1000 (Ethernet)
RX packets 186 bytes 10886 (10.8 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5 bytes 480 (480.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

You can now for example test the connection over the network interface by sending ping requests.
Testing IPV4 connection:
ping -4 -I wwan0 8.8.8.8
PING 8.8.8.8 (8.8.8.8) from 2.68.73.130 wwan0: 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=118 time=55.8 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=118 time=45.4 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=118 time=42.9 ms
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 42.918/48.053/55.845/5.601 ms

Testing IPV6 connection: (if your cellular device, network subscription and APN supports it)
ping -6 -I wwan0 2600::
PING 2600::(2600::) from 2a02:aa1:1017:6d11:1060:3dff:feac:e92f wwan0: 56 data bytes
64 bytes from 2600::: icmp_seq=1 ttl=46 time=172 ms
64 bytes from 2600::: icmp_seq=2 ttl=46 time=171 ms
64 bytes from 2600::: icmp_seq=3 ttl=46 time=169 ms
64 bytes from 2600::: icmp_seq=4 ttl=46 time=168 ms
--- 2600:: ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 167.921/170.037/172.272/1.651 ms

The connection is successful and automatic reconnect is working when testing to unplug and plug in the device again.
For additional configurations, commands and available attributes, please relate to the manual pages for NetworkManager and ModemManager.

Troubleshooting logs:
NetworkManager and ModemManager write log messages to the Linux syslog file /var/log/syslog.
In case of problems with establishing a cellular data connection, please copy the logfile after the problem have appeared and include it in a Techship technical support ticket.

In some situations more detailed debug logs are needed, these can be acquired by changing the log levels for NetworkManager and ModemManager and run them manually.

To capture debug logs, please first disable and stop the normal services:
systemctl stop NetworkManager ModemManager
systemctl disable NetworkManager ModemManager

Run them manually in background with debug level set:
/usr/sbin/ModemManager --log-level=DEBUG &> /dev/null &
/usr/sbin/NetworkManager --log-level=DEBUG &

Reproduce the cellular data connection problem.
Once completed, kill the processes:
killall -TERM NetworkManager ModemManager

Copy the relate messages in syslog to a mm-nm-sys-debug.log logfile:
grep -E 'ModemManager|NetworkManager|systemd|dbus-daemon|dhclient' /var/log/syslog > mm-nm-sys-debug.log

Activate and start the services again:
systemctl enable NetworkManager ModemManager
systemctl start NetworkManager ModemManager

Include the mm-nm-sys-debug.log in a technical support ticket at Techship.com where you describe the issue in details and include other relevant information also such as kernel version, ModemManager and NetworkManager versions, dmesg log etc.

Related products

Huawei ME909u-521 - EU/ASIA
Huawei ME909u-521 Mini PCI Express - EU/ASIA
Huawei ME909u-523D Mini PCI Express - US - AT&T
Huawei MS2131i-8 USB-stick
Huawei ME909s-821 mPCIe
Huawei ME909s-821 LGA
Huawei ME909s-120 mPCIe EU
Huawei ME909s-120 LGA EU
SimCom SIM7100E LTE SMT EU
SIMCom SIM7100A LTE SMT US
SimCom SIM7100E LTE mPCIe EU
SimCom SIM7100A LTE mPCIe US
SimCom SIM7100C LTE mPCIe China
SimCom SIM7230 LTE mPCIe EU
SimCom SIM7100E LTE mPCIe SIM
SIMCom SIM7500A LTE SMT US
SIMCom SIM7500E LTE SMT EU
SIMCom SIM7500E LTE mPCIe EU
SIMCom SIM7500SA LTE mPCIe Audio
Telit HE910-D-SIM HSPA+, miniPCIe, SIM card holder
Telit LM940A11 LTE CAT-11, GPS, mPCIe
Telit LE910-EU V2 LTE CAT-4, mPCIe
Telit LE910-SV V2 LTE CAT-4, Verizon, mPCIe
Telit LE910-NA V2 LTE CAT-4, AT T, TM, mPCIe
Telit LE910-AU V2 LTE CAT-4, Telstra, mPCIe
Telit HE910-GL SIM UMTS, miniPCIe, SIM card holder
Telit LE910-NA1 LTE CAT-1 LGA
Telit LE910-EU1 LTE CAT-1 LGA
Telit LE910-SV1 LTE CAT-1 LGA
Telit LE910-EU V2 LTE CAT-4 LGA
Telit LE910-NA V2 LTE CAT-4 LGA
Huawei MS2372h-153 LTE USB Dongle EU
SIMCom SIM7600E-H LTE SMT EU
SIMCom SIM7600E-H LTE CAT-4 mPCIe EU
SIMCom SIM7600E-H LTE CAT-4 mPCIe SIM
Huawei MS2372h-517 LTE USB Dongle US
SIMCom SIM7600A-H LTE CAT-4 mPCIe Audio
Huawei MS2372h-607 LTE USB Dongle Asia
Telit LE910-NA V2 LTE CAT-4, S.SKU, mPCIe
SIMCom SIM7600SA-H LTE CAT-4 mPCIe
Simcom SIM7600JC-H LTE CAT-4 mPCIe
SIMCom SIM7600A-H LTE CAT-4 mPCIe US
SIMCom SIM7600V-H LTE CAT-4 mPCIe Audio Verizon
Fibocom NL668-EAU mPCIe LTE CAT-4
SIMCom SIM7600SA-H LTE CAT-4 mPCIe with SIM holder
SIMCom SIM7600E LTE CAT-1 mPCIe
SIMCom SIM7600SA LTE CAT-1 mPCIe
SIMCom SIM7600E-H LTE CAT 4 -mPCIE with Audio
Fibocom NL678-E mPCIe LTE CAT-6
SIMCom SIM7600A-H LTE CAT-4 mPCIe-SIM
SIMCom SIM7600CE-T LTE CAT-4 mPCIe CN
Sierra Wireless MC-WP7607 LTE CAT-4 mPCIe
Telit LE910C4-NF LTE CAT-4 mPCIe
Telit LE910-NA V2 LTE CAT-4, S.SKU LGA
Telit LE910B1-NA S.SKU LTE Cat-1 LGA
Telit LE910C1-NS LTE CAT-1 Sprint mPCIe
Telit LE910-SVL LTE CAT-1
Telit HE910-GL HSPA+ LGA
SIMCom SIM7906E LTE CAT-6 M.2
SIMCom SIM7906E LTE CAT-6 mPCIe
Telit LE910-SVG LTE CAT-3 LGA
Telit HE910-NAR HSPA LGA
Telit HE910-D HSPA+ LGA
Telit LE910C1-NA LTE CAT-1 AT&T LGA
Telit LE910C1-NS LTE CAT-1 Sprint LGA
Telit LE910-NAG LTE CAT-3 AT&T LGA
Telit LE910-SVG LTE CAT-3 mPCIe
Telit LE910-NVG LTE CAT-3 LGA
SIMCom SIM7600G-H LTE CAT-4 mPCIe
Telit LE910-NA1 S.SKU LTE Cat-1 LGA
Telit LE910-JN1 LTE Cat-1 LGA
Telit LE910C1-AP
Telit LE910C1-EU LTE CAT-1 LGA
Telit LE910B1-NA
Telit LE910B1-SA
Telit LE910-AU V2
Telit LE910-SV V2
Telit LE910B4-NA
Telit LE910C4-NF LTE Cat-4 LGA
Telit LE910-SV1 LTE Cat-1 mPCIe
Telit LE910-EU1 LTE Cat-1 mPCIe
Telit LE910-JN1 LTE Cat-1 mPCIe
Telit LE910-NA1 LTE Cat-1 mPCIe
Telit LE910C1-AP LTE CAT-1 mPCIe
Telit LE910C1-EU LTE CAT-1 mPCIe
Telit LE910C4-EU LTE CAT-4 mPCIe
Telit LE910C4-EU LTE CAT-4 mPCIe SIM
Telit LE910C1-NF S.SKU LTE CAT-1 LGA
Telit LM940A11, HW Rev. 2, LTE CAT-11, GPS, mPCIe
Telit LE910C4-NF LTE CAT-4 mPCIe SIM
SIMCom SIM7912G LTE CAT-12 M.2
Telit LM960A18 LTE CAT-18 mPCIe
Telit LE910C1-EU LTE CAT-1 mPCIe SIM
Telit LE910C1-AP LTE CAT-1 mPCIe SIM
Telit LE910C1-NF LTE CAT-1 mPCIe
Telit LE910C4-AP LTE CAT-4 mPCIe SIM
Telit LE910C4-CN LTE CAT-4 mPCIe
Telit LE910C4-CN LTE CAT-4 mPCIe SIM
SIMCom SIM7600V-H LTE CAT-4 M.2 Verizon
Sierra Wireless EM7411 NAM
Sierra Wireless MC7411 NAM
Sierra Wireless EM7421 EMEA/APAC
Sierra Wireless MC7421 EMEA/APAC
Sierra Wireless EM7431 Japan
Sierra Wireless MC7431 Japan
Huawei MS2372h-158 LTE USB Dongle EU
Huawei MS2372h-518 LTE USB Dongle US
Huawei MS2372h-608 LTE USB Dongle Asia
Huawei ME909s-120p V2 mPCIe
Huawei ME909s-120 V2 LGA
Telit LE910C1-SA CAT-1 LGA
SIMCom SIM7600E LTE CAT-1 SMT
Telit LE910C1-NF S.SKU LTE CAT-1 mPCIe SIM
Sierra Wireless MC-WP7610 LTE CAT-4 mPCIe
SIMCom SIM7600G-H R2 LTE Cat-4 mPCIe
SIMCom SIM7600NA-H LTE Cat-4 mPCIe
Telit LE910C1-LA LTE CAT-1 mPCIe
Telit LE910C4-EU LTE CAT-4 LGA
Sierra Wireless EM7690 LTE CAT-20
Sierra Wireless MC7455 mPCIe
Sierra Wireless MC7430
Sierra Wireless EM7565 M.2
Sierra Wireless EM7430 M.2
Sierra Wireless EM7511 M.2
Telit LE910C1-EUX LTE CAT-1 mPCIe
SIMCom SIM7600G-H R2 LTE CAT-4 SMT
Sierra Wireless, EM7455 M.2
SIMCom SIM7600G R2 LTE CAT-1 SMT
SIMCom SIM7600SA LTE CAT-1 SMT
Alcatel IK41VE1 LTE USB Dongle EU
Alcatel IK41CQ LTE USB Dongle APAC
Alcatel IK41UD LTE USB Dongle LATAM
Alcatel IK41UC LTE USB Dongle NA
Telit LE910C4-LA LTE CAT-4 mPCIe
Telit LE910C4-AP LTE CAT-4 LGA
SIMCom SIM7600G-H R2 LTE CAT-4 M.2
Telit LE910C1-EUX LTE Cat-1 LGA
Telit LE910C1-SAX LTE Cat-1 LGA
Telit LE910C1-SVX LTE Cat-1 LGA
SIMCom SIM7600G-H R2 mPCIe SIM
Telit LE910C4-LA LTE CAT-4 mPCIe w/ Simholder
SIMCom SIM7600E-H R2 LTE CAT-4 mPCIe EU
Simcom SIM7600E R2 LTE CAT-1 mPCIe
Telit LE910C1-WWX LTE Cat-1 mPCIe
Telit LE910C4-WWX LTE Cat-4 mPCIe
Telit LE910C1-WWX LTE Cat-1 LGA
Telit LE910C4-WWX LTE Cat-4 LGA

Permanent link

Quantity	Price

Sign In

Restore password

GENERAL TERMS AND CONDITIONS FOR PURCHASE OF PRODUCTS AND SERVICES FROM TECHSHIP AB

Delivery

Delivery Terms and Transfer of Title

Payment Terms

Documentation

Customization

Certifications and Operator Approvals

Handling of Faulty Units

Warranty

Limitation of Liability

Software and Documentation

Other Terms and Conditions

TECHSHIP INC Terms and Conditions of Sale (the "Terms")

Orders

Products

Prices

Taxes

Invoice and Payment.

Delivery; Risk of Loss; Inspection and Claims

Returns

Limited Warranty

LIMITATION OF LIABILITY

Force Majeure

Trademarks

Expenses

Export Control; Product Compliance with Governmental Requirements

Intellectual Property

Governing Law and Exclusive Jurisdiction

Miscellaneous

PRIVACY POLICY

Processing of personal data

What personal data we are processing and why we are collecting it

Disclosure of data to third parties

Data collected by web browsing

Your rights as Data Subject

How we protect your Personal Data

Data retention

Amendments of this Privacy Policy

Contact information

COOKIES POLICY

Cookies

Usage of anonymous data

Further information

NON-DISCLOSURE AND CONFIDENTIALITY AGREEMENT

Whereas,

Now therefore it is agreed as follows:

SECTION 301 - CHINA TARIFF

Techship will begin billing section 301 tariffs to our US customers

Whistleblowing

SUBSCRIBE TO UPDATES

Sign In

Restore password

Restore password

Set password

Categories

No subcategories

Telit LE910C4-LA LTE CAT-4 mPCIe

End-of-life

No prices available

Telit LE910Cx Series mPCIe Data Card Datasheet

Telit LE910Cx LWM2M AT Commands Reference Guide

Telit LE910Cx Series Software User Guide

Telit LE910Cx-series mPCIe Hardware Design Guide

Telit LE910Cx-series AT Commands Reference Guide

Telit WHQL Windows 11 Drivers Installer User Guide

Telit WHQL Windows 10 Drivers Installer User Guide

Telit IP Easy User Guide

Telit LE910Cx Series Voice Audio Over USB Application Note R5

Using ModemManager in Linux with Telit Modems - Application Note

Telit LE910Cx Series MiniPCIe Form Factor Thermal Design Guide R2

Using NetworkManager in Linux with Telit Modems - Application Note

Telit LE910Cx ME910C1 ML865C1 NE910C1 Module Series A-GPS Application Guide R3

Telit SSL/TLS user guide

Telit LE910Cx Linux Device Driver Application Note

Telit LE910Cx SGMII & SDIO Design Guide

Telit - How To Enter The North America Market - Certification Guide R3

Telit XFP Stream Firmware Update Tool for Windows V.4.2.10

Telit Cellular Modules USB drivers For Microsoft Windows 11 V.11.02.0001 (WHQL certified)