TECHSHIP IS A GLOBAL SUPPLIER OF WIRELESS COMPONENTS
Telit LN920 M.2 data card is part of the family of Telit high-speed data cards. Designed in M.2 (NGFF) form factor, it is the natural evolution toward 5G technology. Note
The LN920 is available as LTE Category (Cat) 12 (600 Mbps peak data rate DL, 150 Mbps UL) and Cat 6 (300 Mbps peak data rate DL, 50 Mbps UL). This data card supports a broad set of LTE frequency bands and carrier combinations and includes 3G/HSPA+ legacy technology and a GNSS receiver, making it ideal for worldwide deployments.
Compatible with 3GPP Release (Rel) 12, it is certified for global deployments across EMEA, the Americas and APAC, including specific MNO certifications in regions requiring them like APAC and NA.
The LN920 series is designed for global use and suitable for both high-performance industrial and consumer applications, including fixed wireless access, enterprise routers and gateways, indoor and outdoor CPE, and mobile computing (e.g., notebooks, tablets).
• Standard M.2 (NGFF) form factor
• Same pinout for Cat-6 and Cat-12 modules.
• Broad frequency band support, ideal for worldwide depoloyments and private LTE networks.
• High-speed USB 3.0
• Support of up to 3xCA DL (Cat-12)
• Full industrial operating temperature range
Development board available here;
11340, Telit LN920 interface TLB w/o module
This module is HW 1.0 and Not Recommended for New Design (NRND) please see HW 1.1 here;
Telit LN920A12-WW HW 1.1 LTE Cat-12 M.2
Telit LN920 M.2 data card is part of the family of Telit high-speed data cards. Designed in M.2 (NGFF) form factor, it is the natural evolution toward 5G technology.
LWM2M AT command reference guide for Telit LN920 series
This document describes the QUALCOMM® MSM™ Interface (QMI) architecture and framework. The QMI allows applications on attached Terminal Equipment (TE) devices to access various Services provided by devices based on QUALCOMM’s MSM chipsets and AMSS software.
This archive contains the Windows 11 WHQL certified Telit module drivers for x64 system platforms.
Microsoft Windows 11
This archive contains the Windows 10 WHQL certified Telit module drivers for both x86 and x64 system platforms.
Microsoft Windows 10
Archive containing the Telit windows based firmware update for LN920A6 and LN920A12 modules.
Windows 10/11 host system
Telit Windows WHQL drivers installed
PCN-0675-22-0020 for Telit LN920 series
How to collect initial diagnostics data and logs for Telit cellular modules needed when requesting Techship technical support?
In order to ease the troubleshooting of technical problems and understand your end-product or application and its usage scenario we ask you to please provide the following information when creating a technical support ticket at: techship.com/technical_support/
Please give a detailed problem description and in what precise circumstances it is present.
Describe the host system:
-Hardware (system board, processor architecture, other peripheral devices...)
-Operating system with detailed versions (E.g. Windows version and build, Linux distribution, kernel version)
-Drivers used and versions (Linux: out-of-tree vendor drivers or in-kernel drivers?)
Details from the cellular module label:
-SKU/BOM or P/N code
For Linux systems, capture terminal logs from commands:
ls -l /dev/serial/by-id
ls -l /sys/bus/usb-serial/devices
The cellular module logs can be acquired by accessing one of the USB enumerated serial (COM) interfaces or physical UART serial interfaces accepting AT commands. In Windows device manager they are generally found as modem infterface or serial and ports interface types).
Send AT commands to module and capture the text output:
Test that you get a OK reply:
Enable AT command echo:
Verbose error reporting:
USB endpoint configuration:
Serial port configuration:
Selected network access techniques:
List network operator info:
Network registration status:
Last serving cell network information:
Current network status:
List APN details:
List Packet switch enable/disable status:
List PDP profiles status:
List default data connection details:
List bearers and IP addresses:
Additional test commands for Telit LM940/LM960/FN98x:
Antenna Location: External | Max power: 50 W | Radiation pattern: Omnidirectional | Polarization: Vertical | Impedance: 50 Ohm | Diameter: 12.8 mm | Length: 195 mm | Connector Type: SMA-M | VSWR: 2.5 :1 | Mounting method: Connector | Technology / Antenna Frequency: GSM 850/900/1800/1900, UMTS 2100, LTE 790-960/1710-2690
1 PCS PRICE $7.80