TECHSHIP IS A GLOBAL SUPPLIER OF WIRELESS COMPONENTS
Compliant with 3GPP Release 14 (Rel. 14), the ME310G1 LTE UE Cat M1/NB2 module enables increased power saving for IoT applications using Power Saving Mode (PSM) and extended Discontinuous Reception (eDRX). These features allow devices to wake up periodically and deliver only small amounts of data necessary before returning to sleep mode. Enhanced coverage, enabled by maximum coupling loss (MCL) of up to +15 dB/+20 dB, provides superior in-building penetration compared to earlier cellular LTE standards. LTE Cat M1/NB2 devices are optimized in cost, size and power consumption compared to higher UE categories. 3GPP Rel. 14 further improves these features by adding techniques to increase the data rate for LTE-M and NB-IoT
• Small size and low power consumption
• Optimized for ease-of-design, high yield and low-cost manufacturing
• Compliant to 3GPP Rel. 14 Cat M1/NB2, tailored for IoT devices
• An ideal solution for medical devices, fitness trackers, industrial sensors, smart meters and other mass-production, mass-deployment applications.
Contact email@example.com for more information, MOQ's may apply.
This version of ME310G1 supports VoLTE, for version without VoLTE;
11030 - Telit ME310G1-WW
IP Easy User guide for Telit modules
SSL/TLS user guide for Telit modules.
This archive contains the Windows 11 WHQL certified Telit module drivers for x64 system platforms.
Microsoft Windows 11
This archive contains the Windows 10 WHQL certified Telit module drivers for both x86 and x64 system platforms.
Microsoft Windows 10
How to configure and save a "User Profile" using AT-commands on selected Telit modems.
Sometimes you might want to store some settings to be automatically loaded on startup, without having to configure your modem or make a script.
Fortunately Telit has made it easy to do this, by creating a "User Profile", and this FAQ will guide you through on how to set this up.
For this example, we'll make some configurations to the GPS settings of the module, but you can choose whichever settings you like.
First, send the AT command:
You will get a long list with info, but the one I want you to check is the last one:
DEFAULT PROFILE : &Y0=user profile 1
Make note of the "Y0" - This might be different on your setup, but don't worry, we'll change this in the next step.
Send the following AT command:
This sets the modem to a custom user profile. (There are 2 user profiles available, "0" and "1". We are using "0" here.)
Now check that we have updated the profile with the AT command:
And now it should say at the bottom:
DEFAULT PROFILE : &P0=user profile 1
Great! Now we're editing our user profile, so go ahead and type your settings:
AT$GPSP=1 AT$GPSANTPORT=3 AT$GPSACP AT$GPSNMUN=1 AT$GPSNMUN=1,1,1,1,1,1,1 AT$GPSSAV
To save these settings, it's not enough to only type "AT$GPSSAV", we need to save some of the settings to our profile!
Type the following AT command to do a "save profile":
Now do a reboot with:
And when it's up and running again type:
And it should say:
More info regarding the different modes and settings can be found in the AT Command Guide here.