TECHSHIP IS A GLOBAL SUPPLIER OF WIRELESS COMPONENTS
Telit ME910C1-AU GNSS LTE CAT-M1/NB1 LGA
Get started with 10786 Telit ME910C1-AU Developer Kit
The ME910C1 is the LTE UE Category M variant of the Telit LE910 series of LTE modules with optional quad-constellation GNSS . Ideal for numerous IoT applications, CAT M1 modules are optimized for efficient power consumption and enhanced coverage. Swappable with other models in the xE910 family of 28 x 28 mm LGA modules, the ME910C1 is the perfect solution for smart metering, security and surveillance, point of sale, health monitoring, fleet management, asset tracking, and wearables. The ME910C1 delivers maximum downlink and uplink data rates in the range of 300kbps.
This next generation of products supports the new features specified by 3GPP to boost IoT applications, The modules support power saving mode and extended discontinuous reception (eDRX), which together allow the module to wake up periodically, exchange small amounts of data with the network and return to sleep, providing for years of battery life. LTE Cat M devices contain a host of features that deliver cost-effective, compact designs, and ultra-low power consumption compared to higher UE categories. These advantages make the ME910C1 the perfect platform to enable a quick implementation of LTE technology in IoT/M2M where low cost and low power are more relevant than high speed.
The ME910C1 helps increase the addressable market for LTE technology to include a broad range of new applications and use cases best served with lower maximum data rate, ultra-low power, reduced complexity and cost. Some examples are smart meters, industrial sensors, healthcare monitors, home automation, asset tracker and many other low data rate IoT devices.
The ME910C1 is offered in two different band configurations for deployment in Verizon Wireless, AT&T and T-Mobile 4G networks; Additional regional variants will follow, starting with an addition SKU for EMEA market. It is highly recommended for new designs, but also in particular as a migration path for existing GPRS or CDMA devices, both new and updated designs benefit from a significantly extended product lifecycles with LTE Cat M1.
- Design once and deploy globally, with the swappable xE910 form factor family
- Perfect platform for regional IoT applications such as smart metering, security & surveillance, point of sale, health monitoring, fleet management, asset tracking and wearable devices.
- LTE UE Category M1 is compliant with the latest 3GPP Release 13 enhanced Machine-Type Communication (eMTC), specifically designed for IoT use cases, offeringminimum power consumption and extended coverage.
This document the describes the specifications of the Telit ME910C1 series modules.
Scope of this document is to give a description of some hardware solutions useful for developing a product with the Telit ME910C1 module.
This guide describes the Telit xE910 series shared surface mount LGA design.
Scope of this document is to give an overview of the good rules to integrate a 2G, 3G, 4G modem with its antenna into a board, posing particular attention on the common pitfalls and best practices.
This document is aimed at providing a detailed specification and a comprehensive listing as a Reference for the whole set of AT command
This document covers the more significant standard and proprietary AT commands provided by Telit's modules. Several module features are described and for each one of them the related AT commands are explained through examples. This document is not an exhaustive description of the AT commands implemented on the Telit's modules series, its target is only to give you an entry point to the AT commands world.
This document describes the integration steps of the cellular modules USB endpoints in Linux systems.
Application note describing the PSM (Power Saving Mode) function for the Telit ME910C1, NE910C1 and ML865C1 cellular modules.
SIM Integration Design Guide Application Note for Telit modules r13
Application guide for A-GPS functionality on the Telit LE910C1 series, LE910C4 series, ME910C1 series, ML865C1 series, NE910C1 series cellular modules with embedded GNSS tracker.
This archive contains the Telit XFP Firmware Update Tool installer used to update the firmware on Telit Cellular modules over USB-serial interface.
This archive contains the Windows 10 WHQL certified Telit module drivers for both x86 and x64 system platforms.
Zip archive with Telit cellular modules USB drivers installers for Windows 7, 8.x, 10 both x86 and x64 system architectures.
(Non WHQL certified drivers).
This archive contains the Telit AT controller tool as well as XFP firmware update tool for Microsoft Windows systems.
It can be used to troubleshoot, test and command the Telit cellular module in a graphical interface.
This archive contains the Windows installer for the Telit Mobile Broadband Connection Tool verison 2.7.1
This archive contains the Telit Connection Manager installer for Microsoft Windows systems
How to collect initial diagnostics data and logs for Telit cellular modules needed when requesting Techship technical support?
In order to ease the troubleshooting of technical problems and understand your end-product or application and its usage scenario we ask you to please provide the following information when creating a technical support ticket at: techship.com/technical_support/
Please give a detailed problem description and in what precise circumstances it is present.
Describe the host system:
-Hardware (system board, processor architecture, other peripheral devices...)
-Operating system with detailed versions (E.g. Windows version and build, Linux distribution, kernel version)
-Drivers used and versions (Linux: out-of-tree vendor drivers or in-kernel drivers?)
Details from the cellular module label:
-SKU/BOM or P/N code
For Linux systems, capture terminal logs from commands:
ls -l /dev/serial/by-id
ls -l /sys/bus/usb-serial/devices
The cellular module logs can be acquired by accessing one of the USB enumerated serial (COM) interfaces or physical UART serial interfaces accepting AT commands. In Windows device manager they are generally found as modem infterface or serial and ports interface types).
Send AT commands to module and capture the text output:
Test that you get a OK reply:
Enable AT command echo:
Verbose error reporting:
USB endpoint configuration:
Serial port configuration:
Selected network access techniques:
List network operator info:
Network registration status:
Last serving cell network information:
Current network status:
List APN details:
List Packet switch enable/disable status:
List PDP profiles status:
List default data connection details:
List bearers and IP addresses:
Additional test commands for Telit LM940/LM960: